1200mhz bus on 875p? no..?

sharps107

Distinguished
Apr 27, 2004
66
0
18,630
take a look at this article (page 6): http://www.xbitlabs.com/articles/other/display/zalman-reserator_6.html

the first two parts are almost concievable: a 2.4C at 3.6ghz IS possible on that mobo with the right settings and RAM, BUT LOOK AT THE RAM! kingston pc3500?? this has gotta be a mistake. i didnt think there existed ddr that could do fsb300, and now hes claiming to have done with low latency pc3500? i dont think so. somebody plz look into this. and if this memory can really do 300mhz then for the love of god tell me where to get it!

-I'm Laughing At It Now-
 
Well, HyperX has come in a lot of flavors over the last two years. A lot of the early sticks used Winbond BH-5 chips that could hit a 275FSB if you could provide 3.2vdc. The recent incarnations or the "A" sticks contain Samsung or Hynix chips and fizzle out long before 230mhz. The latest Version may contain the Super-Samsung chips that perform a lot like the Crucial Ballistix sticks. Those PC3200 sticks can hit a 260FSB or better at 2.8vdc. In short, you'd have to know what chips are on the stick before you could say it's impossible. Getting the board stable, the bridge-chips cooled, and the V-regs cooled would be the larger task at a 300mhz FSB.

Abit IS7 - 3.0C @ 3.6ghz - Mushkin PC4000 (2 X 512) - Sapphire 9800Pro - TT 420 watt Pure Power
Samsung 120gb ATA-100 - Maxtor 40gb ATA - 100
Sony DRU-510A - Yellowtail Merlot
 
From what i have seen so far, He doesn't state he is running the HyperX inSync with the FSB.

ABIT IS7, P4 2.6C, 1GB Corsair XMS 4000 Pro Series, Radeon 9800 Pro, Santa Cruz, TruePower 430watt<P ID="edit"><FONT SIZE=-1><EM>Edited by Pauldh on 09/18/04 02:27 PM.</EM></FONT></P>
 
😀 hell yeah!

Abit IS7 - P4E3.0@3.45- i865PE - 1024mb dual ddr400 - Leadtek 6800 128mb@380/850 - 600W dualfan(front/rear) PowerTek Psu - maxtor 4K080H4 & 6Y120P0 - samsung sm-352b