Long story short - built a workstation about 5 years ago before I went to film school, used it for about 3.5 years then it went into storage as my job in the industry didn't require it. Getting back into my own projects and brought it out of storage, made the mistake of not dusting it, CPU got fried now I'm thinking of building a whole new workstation.
Approximate Purchase Date: End of October
Budget Range: $1500 not including GPU
System Usage from Most to Least Important: Video Editing (up to 4K )
Are you buying a monitor: No
Parts to Upgrade: CPU/MOBO/MEMORY/STORAGE
Do you need to buy OS:No
Preferred Website(s) for Parts: ncix.com (canada)
Location: City, State/Region, Country - BC Canada
Overclocking: No
SLI or Crossfire: I don't think I need this for Video editing??
I'll be looking to use the Adobe Suite, mainly premiere to edit footage at higher resolutions, possibly some light AE work.
OLD WORKSTATION
Video Card: XFX Radeon HD 4890 XT 1GB
PSU : Corsair TX750W ATX 12V 60A 24PIN ATX
MOBO : ASUS P6T X58 ATX LGA 1336
CPU: Intel Core i7 920 Quad Core
MEMORY: 12GBs Corsair XMS3 HX3X12G1600C9
STORAGE: 2x 500GB HDDs
The video card I will have to upgrade later down the road as **my budget at the moment is $1300 CAD.** I could go up to $1500 but I would rather not.
This is what I am thinking at the moment. I still haven't decided on a MOBO as I am not sure what I should be looking for. Any suggestions would be greatly appreciated.
PCPartPicker part list: http://ca.pcpartpicker.com/p/cRTHyc
CPU: Intel Core i7-6700 3.4GHz Quad-Core Processor ($435.98 @ Newegg Canada)
Memory: G.Skill Ripjaws V Series 16GB (2 x 8GB) DDR4-2400 Memory ($149.99 @ DirectCanada)
Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ($218.99 @ DirectCanada)
Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ($218.99 @ DirectCanada)
Total: $1023.95
PSU: Because my PSU is 4 years old it was suggested I maybe look into purchasing a new PSU as well as I have been told if that goes it can take a whole lot more with it. I'm just not sure if it's in my budget at the moment.
GPU: I haven't even thought about what kind of GPU I should be looking for down the road. Any suggestions would be appreciated.
CASE: Currently I am using an old silverstone case, I talked to a salesperson at NCIX and he did try to up sell me a new case as he mentioned my old case wouldn't have USB 3.0. There has to be a way to get USB 3.0 into my silver stone though right? Like instead of spending $80 on a new case I'm pretty sure I could just get a USB 3.0 front panel or something?
Approximate Purchase Date: End of October
Budget Range: $1500 not including GPU
System Usage from Most to Least Important: Video Editing (up to 4K )
Are you buying a monitor: No
Parts to Upgrade: CPU/MOBO/MEMORY/STORAGE
Do you need to buy OS:No
Preferred Website(s) for Parts: ncix.com (canada)
Location: City, State/Region, Country - BC Canada
Overclocking: No
SLI or Crossfire: I don't think I need this for Video editing??
I'll be looking to use the Adobe Suite, mainly premiere to edit footage at higher resolutions, possibly some light AE work.
OLD WORKSTATION
Video Card: XFX Radeon HD 4890 XT 1GB
PSU : Corsair TX750W ATX 12V 60A 24PIN ATX
MOBO : ASUS P6T X58 ATX LGA 1336
CPU: Intel Core i7 920 Quad Core
MEMORY: 12GBs Corsair XMS3 HX3X12G1600C9
STORAGE: 2x 500GB HDDs
The video card I will have to upgrade later down the road as **my budget at the moment is $1300 CAD.** I could go up to $1500 but I would rather not.
This is what I am thinking at the moment. I still haven't decided on a MOBO as I am not sure what I should be looking for. Any suggestions would be greatly appreciated.
PCPartPicker part list: http://ca.pcpartpicker.com/p/cRTHyc
CPU: Intel Core i7-6700 3.4GHz Quad-Core Processor ($435.98 @ Newegg Canada)
Memory: G.Skill Ripjaws V Series 16GB (2 x 8GB) DDR4-2400 Memory ($149.99 @ DirectCanada)
Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ($218.99 @ DirectCanada)
Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ($218.99 @ DirectCanada)
Total: $1023.95
PSU: Because my PSU is 4 years old it was suggested I maybe look into purchasing a new PSU as well as I have been told if that goes it can take a whole lot more with it. I'm just not sure if it's in my budget at the moment.
GPU: I haven't even thought about what kind of GPU I should be looking for down the road. Any suggestions would be appreciated.
CASE: Currently I am using an old silverstone case, I talked to a salesperson at NCIX and he did try to up sell me a new case as he mentioned my old case wouldn't have USB 3.0. There has to be a way to get USB 3.0 into my silver stone though right? Like instead of spending $80 on a new case I'm pretty sure I could just get a USB 3.0 front panel or something?