1866mhz 4gbx2 Hyperx Fury on ASUS M4N68T - M LE V2

[janmykelg]

Hi guys, I need your help here. Recently I replaced my old ram (Kingston 1333mhz 4gb) with two 4gb Hyperx Fury 1866mhz. Now my problem is that the system only shows 1600mhz. I checked the memory clock option in the bios but only the available options are 800mhz, 666mhz and 533mhz. The specs mentioned that my board will be able to handle at least 2 x DIMM, Max. 8GB, DDR3 1800(O.C.)/1600(O.C.)/1333/1066 Hz ECC, Non-ECC, Un-buffered Memory. I read some forums about the XMP profile but unfortunately this motherboard doesn't have one.

Thanks in advance guys!

 

[Tradesman1]

What mobo and CPU - the Fury run off PnP so they set themselves up to the max they can run - might be able to take them to 1866 manually if mobo and CPU can support 1866

 

[janmykelg]

What mobo and CPU - the Fury run off PnP so they set themselves up to the max they can run - might be able to take them to 1866 manually if mobo and CPU can support 1866

CPU is AMD Athlon II x 4 640 processor
and Motherboard is ASUSTeK Computer INC. M4N68T-M-LE-V2 (AM3)

Here is the link to the mobo where it says it supports up to 1800(oc) https://www.asus.com/ph/Motherboards/M4N68TM_LE_V2/HelpDesk/

When I first inserted the 1866mhz ram the system automatically set it to 1600mhz. So I have to check it on the BIOS if I can manually set it to 1866mhz. The only options that was available are 800mhz, 666mhz and 533mhz.

CPU I have not checked yet. Will do.

 

[janmykelg]

Checked it already at http://www.amd.com/en-us/products/processors/desktop/athlon-ii.

There does not seem to be any information regarding how much mhz the CPU can support.

 

[Tradesman1]

CPU suppors up to 1333 (prob 1600) if OCed