1866Mhz Ram not running at it's full speed

[Itazura]

As the title says already, My Kingston HyperX Fury for some reason only runs at 889Mhz each stick. which usualy should stack up to 1866Mhz but in this case it's only 1778Mhz (889Mhz*2). Does anyone have an idea why it is like this ?
Ah and here there is a screenshot of it.

 

[Dark Lord of Tech]

888 x 2 = 1776 . IT'S RUNNING ABOVE SPEC

Download Speccy

 

[neieus]

Have you tried setting the xmp profile in the bios?

 

[spp85]

Are you properly selected the 1866 XMP profile in the BIOS ??

 

[Itazura]

so that means ?

 

[Dark Lord of Tech]

That's normal nothing is wrong , you have to multiply it by 2 = DDR Double data rate.

 

[spp85]

If you adjusted CPU bus frequency RAM frequency can change also

 

[Itazura]

that's the weird thing about it. My Mobo doesn't support XMP Profiles (GA-Z97-D3H)

 

[Dark Lord of Tech]

It's running above spec , download speecy see what it states , it's DDR so you multipply that number by 2.

 

[Dark Lord of Tech]

Your readings are fine .

 

[spp85]

Oh No your motherboard does supports XMP profile. Just go to memory section> Extreme Memory Profile XMP> select your frequency 1866> Done!!

 

[Itazura]

Speccy tells me this: 8,00GB Dual-Channel DDR3 @ 933MHz (10-11-10-30)

 

[Dark Lord of Tech]

What does the main screen in the BIOS state?

 

[Itazura]

what doyou mean by that ?

 

[Dark Lord of Tech]

933MHz X 2 = 1866 😀

 

[spp85]

Speccy tells me this: 8,00GB Dual-Channel DDR3 @ 933MHz (10-11-10-30)

Yes 933 X 2= 1866 Mhz

 

[Dark Lord of Tech]

Your fine.

 

[Itazura]

ah well, nevermind than. If so i'll have to keep searching what the problem in my system is. Thanks to all of you anyway!

 

[Dark Lord of Tech]

It's running fine , it's DDR ram = Double Data Rate = 933 x 2 = 1866mhz.