1st build rate/ opinion / help

[Some1helpme]

Want to get you guys' opinion on my 1st true complete build.
Parts:
I7 8700 (non k?
16 gb corsair vengeance ddr4
Zotac gtx 1080 ti
Asrock z370 extreme4
Corsair rm 750x
Samsung 970 evo m.2 nvme 500gb.
Corsair 460x case


So the case comes with 3 rgb fans and a fan hub to control them. Added a 4th one for exhaust. Want to get an rgn strip but corsair support says you cant plug in strip to the hub that controls the fans rgn. How would you guys go about doing it? Motherboard has ab rgb header but then case fans, mobo and rgb strip would be all out of whack.

https://ibb.co/c42Luf
https://ibb.co/iLaC70
https://ibb.co/keSs70
https://ibb.co/cPoRZf

Where it's at and the home made table isn't permanent so dont judge that to much

 

[SgtScream]

It sounds like Corsair does not support Asus Polychrome Sync. You'd have to either find a case manufacturer that does or change to a motherboard where their sync software works with corsair. You might have to get something like the Corsair commander pro. They did not suggest anything? What is your max budget and what country are you from?

 

[devbiker]

Hey! The 460X comes with Corsair SP-RGB fans so keep that in mind.

For an in-depth discussion of all things Corsair RGB, start with this FAQ: http://forum.corsair.com/v3/showthread.php?t=173880. That'll help you begin to put the pieces together.

 

[Some1helpme]

Yeah 3 sp 120 rgb fans, I added a 4th for exhaust. They all plug in to the fan hub (only controls rgb) then also another cable to motherboard.