1st Gaming PC build help.

[con222]

Hi, I am going to build a reasonably low budget gaming pc, (£400 ish), and was wondering if the parts I have chosen are firstly, good quality, secondly are all compatible with each other, and finally is there anything else I need.


CPU: Intel Core i5 3330, S 1155, Ivy Bridge, Quad Core, 3GHz, 5 GT/s DMI, 30x Ratio, 77W
MOBO: MSI H61M-P25 (B3), Intel H61, S 1155, DDR3, SATA II - 3Gb/s, PCIe 2.0 (x16), D-Sub (VGA)/ DVI-D, Micro ATX
Memory: 8GB (2x4GB) Corsair DDR3 Vengeance Jet Black, PC3-14900 (1866), Non-ECC, CAS 9-10-9-27, XMP, 1.50V
Case: Tsunami Gaming Manager Black Mid Tower Case w/o PSU
Graphics: 2GB Gigabyte GTX 650 Ti, Windforce 2X, 28nm, PCIe 3.0 (x16), 5400MHz GDDR5, GPU 1032MHz, Cores 768
PSU: 550W Powercool, Modular, 80 PLUS, 80% Eff', SLI/CrossFire, EPS 12V, Fan Cooling, Dual Rail, ATX 2.2, PSU
Disk Drive: Samsung SH-118AB/BEBE Black 18x SATA DVD ROM
Wireless Adaptor: Edimax EW-7612PIn 300Mbps Wireless 802.11 b/g/n PCI Express Adapter

I Already have a working 1 TB hard drive and a copy of Windows 7 64 bit.
Any help or comments are helpful, Conor.

 

[alvine]

you can save money and get a little bit slower ram. the one you picked is 1866 while you can use 1600 mhz speeds
i would pick a better brand power supply, if you cheap out on that component it can short circuit your components

 

[con222]

you can save money and get a little bit slower ram. the one you picked is 1866 while you can use 1600 mhz speeds
i would pick a better brand power supply, if you cheap out on that component it can short circuit your components

Thanks, so something along the lines of this for the memory, 8GB (2x4GB) Corsair DDR3 Vengeance Jet Black Low Profile, PC3-12800 (1600), Non-ECC, CAS 9-9-9-24, XMP, 1.5V??

And what brand of psu would you recommend?

 

[tiny voices]

for PSU, Antec, XFX, Corsair, Seasonic