2 speakers 2 channels in X

[uubisoftxpeonline]

I want to connect the surround speakers to the amp and if i connect one speaker to the blue output i dont get sound but if i connect one cable to blue and one to gray i get sound...so i thought that if i connect the speakers like: one cable to blue the other to gray(1 speaker) one cable to gray and other to blue(the second speaker)
Speakers are 4 ohm and amp supports only 4 ohm . Will this damage the amp?

 

[dudio]

Need more info.
What amp specifically is it? What speakers?

 

[uubisoftxpeonline]

It is a home theater(hts3583 receiver and stock speakers)

 

[dudio]

Keep the speaker connections seperate (use the blues for one speaker, and the greys for the other). My guess is that with only one side hooked up, the amp won't allow it to operate (not enough load). Try hooking both rears up properly, and see if it's okay.

 

[scout_03]

page 8 of user manual tel you exactly how to connect speaker and set system https://www.download.p4c.philips.com/files/h/hts3583_12/hts3583_12_dfu_fra.pdf

 

[uubisoftxpeonline]

Okok but the blue connectors don"t work for 1 speaker ...

 

[scout_03]

they all have color on the system and blue one should be back left speaker post a picture of the connectors.

 

[dudio]

If you hook it up all correctly, and the blue has no output, then either that channel of the amp is bad, the wire is bad, or the speaker is bad.
Rule them all out by using a set of wires you know work, or a speaker you know works.