[SOLVED] 2 x 360 rads in Lian Li 011 Dynamic

[petrolhead]

Have the Lian Li 011 case (not xl)

the cpu, intel i9 10850, is cooled by a 360 air mounted at the top of the case exhausting out

i now have a RTX 3090 which I want to watercool with a loop.

i have two choices re rads and where to put them and would appriate your advice.

opt 1: 360mm 38mm thick rad bottom of case exhausting in
opt 2: 360mm 27mm thick rad side of case

so, thoughts please

 

[rubix_1011]

Either would be fine assuming you have good case airflow.

 

[Phaaze88]

Top and sides would be the best overall for a dual rad setup. The bottom has the most restrictions out of the 3 if airflow is a concern.
If it isn't, then either is fine as mentioned above.