jorgitoosr20

Honorable
May 27, 2017
5
0
10,510
Wondering if anyone has actually tested a 360 AIO on the 2000D (other than corsairs own products recommended).
I personally want to build a system with an artic liquid freezer ii 360 and i'm not sure if it will fit since i recently built into a 5000D and the Liquid Freezer ii 360 was too close to the vram heatsink. so close that i had to offset the rad using some small metal pieces. I tried to find an image detailing measurements for Corsair AIOs but they simply dont have anything like arctics description.
**Detailed measurements of the Corsair iCUE H150i Elite CAPELLIX XT will help me as well, this one fits for sure and i could compare the thickness and length of the whole AIO for compatibility.












18bf298a-acdb-44be-b043-94a52c79f72e.__CR0,0,970,600_PT0_SX970_V1___.jpg
 
I can't answer about the case itself as I havn't built in one. However I did encounter this issue when building my computer, in my case I opted for a radiator that was no thicker than 27mm to avoid the issues you describe. The Corsair H150i is the traditional 27mm in radiator thickness (397mm x 120mm x 27mm) so quite a bit lower than the Artic so there will be no problems fitting that. The Artic though is one of the best performers probably in part due to the thicker radiator.