[SOLVED] 2080ti flashing bios fail

[Manuel Galletti]

hi everyone, i'm desperate i'm trying to bring a rtx 2080ti msi gaming x trio from 330watt to a maximum of 4oowatt flashing the bios, i've tried all the programs and parts from but everything stays the same, someone performing how to help me? Thanks in advance.

 

[Koekieezz]

hi everyone, i'm desperate i'm trying to bring a rtx 2080ti msi gaming x trio from 330watt to a maximum of 4oowatt flashing the bios, i've tried all the programs and parts from but everything stays the same, someone performing how to help me? Thanks in advance.

What are your pc specs?

 

[kerberos_20]

300watts is base for all of them, for more u have to use overclocking tools like msi afterburner where u can set higher power target (limited by bios setting), so +10% would be base bios and +35% with power test bios (406watts)
https://www.techpowerup.com/vgabios/205495/msi-rtx2080ti-11264-180930

 

[Manuel Galletti]

300watts is base for all of them, for more u have to use overclocking tools like msi afterburner where u can set higher power target (limited by bios setting), so +10% would be base bios and +35% with power test bios (406watts)
https://www.techpowerup.com/vgabios/205495/msi-rtx2080ti-11264-180930

in the end I managed to put 400watt +135 but I have no performance increases why?

 

[Phaaze88]

There could be a number of reasons, but there isn't much to go on. It could be:
-the in game settings.
-the resolution.
-the game engine.
-the cpu.
-the ram.
-the storage.
-the Gpu Boost algorithm isn't comfortable with the gpu's parameters with the new power limit in place. Ever since it was introduced with the GTX 10 series, OC'ing hasn't really been the way to go with these cards, as Gpu Boost will reign in almost all custom settings if it 'feels' you're pushing it too far. So if the card runs hotter than it did previously, or it's running into the power limit more frequently, Gpu Boost is going to respond in kind. Nvidia more or less killed gpu OC for more casual users.
-a combination of the above. Some of them go hand-in-hand with one another.

 

[sizzling]

in the end I managed to put 400watt +135 but I have no performance increases why?

You need to overclock it. Had you done any testing to identify you were hitting the power limit?

 

[ohio_buckeye]

Also that’s a pretty decent card. In the current market…WHAT ARE YOU THINKING?

If you’ve got a working card of that caliber in the current market, leave the card alone. If you brick the card you’ll be replacing it which won’t be cheap.

 

[Koekieezz]

The only way to reflash it is by either hot flash it with a CH314A bios programmer or boot with igpu, and still could get detected on nvflash.