212 evo runing at 60 degrees at idle??

[Majestera]

please help me, ive been looking for help everywhere, but i cant seem to really find any, here is my degreeses at idle http://imgur.com/NBLDKZO someone please help fast,

 

[G-star93]

what's your case and how many fans do you have? How did you applied thermal paste, and not long ago couple of days back some dude had the same problem with the same cooler, turns out he didn't have right backplate on the back of the motherboard mounted on like i said, so the cooler didn't had good contact with cpu.

 

[Majestera]

i think i have it on right do you want a picture?, and its deepcool tesseract white, and i have two 120mm fans one in front and other in back, and i applied it with the pea method

 

[G-star93]

Sure a picture can be helpful, what about backplate? It's the right one? did you screw it in good on your motherboard? Also what's your CPU?

 

[Majestera]

http://imgur.com/2wWpBZO theres tthe backplate, and im using a x4 860k

 

[hermantset]

The backplate is mounted correctly.

First thing I would recommend is to go into your BIOS and check the temperature there. The reading from AMD's software is tricky. Thermal Margin isn't the current temperature reading, but it's the difference between your current temperature and the maximum temperature. So in other words, your CPU is 60C from its maximum and you're fine.

 

[lowc]

You must have installed something incorrectly..
I have installed it 2 days ago (replaced stock one for i7 4771). Because mine is LGA1150 socket I had to use middle spots for screws (and also 4 screws I had to use were the larger ones and not the 4 little ones). That depends on the CPU/socket you are using. My temps dropped at iddle to 28-31(before 35+) and at full load to 50-54 (before i was hitting also max load temp 72). Make sure you've tightened everything as much as it can go and when you try to move cooler clockwise/rotate it does NOT move.