UPDATE
after following some of the advice below (xMP enabling, changing timing settings, etc) everytime i save and reset the screen stays blank. when i hard shut down and then turn it back on again it tells me that 'overclocking failed' and I have to revert to 1133MHz.
The timings i used were 11-11-11-27 and 9-11-11-31 at both 1.5v and 1.65v. I used these two as some websites differed on the required timings and these were the two ones they mentioned
--------------------------------------------
Hi,
I recently upgraded my computers RAM from (2x2GB) DDR3 1133MHz to (2x4GB) DDR3 2133Mhz RAM, however the RAM still runs at a frequency of 1133MHz even though it should be running at 2133 at 1.5volts Any and all help is greatly appreciated.
other info:-
Motherboard: Asus H61M-D
CPU: intel i5 3570 3.4GHz, however maxed at 3.8 by the computer
after following some of the advice below (xMP enabling, changing timing settings, etc) everytime i save and reset the screen stays blank. when i hard shut down and then turn it back on again it tells me that 'overclocking failed' and I have to revert to 1133MHz.
The timings i used were 11-11-11-27 and 9-11-11-31 at both 1.5v and 1.65v. I used these two as some websites differed on the required timings and these were the two ones they mentioned
--------------------------------------------
Hi,
I recently upgraded my computers RAM from (2x2GB) DDR3 1133MHz to (2x4GB) DDR3 2133Mhz RAM, however the RAM still runs at a frequency of 1133MHz even though it should be running at 2133 at 1.5volts Any and all help is greatly appreciated.
other info:-
Motherboard: Asus H61M-D
CPU: intel i5 3570 3.4GHz, however maxed at 3.8 by the computer