Hi, i have a problem getting the 24 pin connector to fit in the mother board. A you can see there is a small gap anger it will not go any farther. I am putting a large amount of force on it and an scared it will break. This problem isn't allowing me to start my computer. I ordered ask the parts for a computer and they arrived yesterday. At first i thought was a bad psu but i did the paper clip test and the fans turn on. What should i do to fix the problem or should i turn the psu the motherboard which ever is the problem back for an exchange. Also, in the24 pin connector you can see one on the pins gave a nursing metal part, is that normal or is defective. My psu: corsair cx 600
Motherboard: msi z87 g45 gaming
Imgur.com/5Djw5yU
Imgur.com/2jkRhlh
Imgur.com/flz2lie
Imgur.com/OH2kRKR
Thank you.
Btw, using phone i see a lot of grammer errors.
Motherboard: msi z87 g45 gaming
Imgur.com/5Djw5yU
Imgur.com/2jkRhlh
Imgur.com/flz2lie
Imgur.com/OH2kRKR
Thank you.
Btw, using phone i see a lot of grammer errors.