Morning guys,
I've been having some bizzare difficulties whilst overclocking my new 2500k.
I currently have it at a fixed voltage of 1.34v @ 4.5ghz for stability.
I had it at 1.3v 2 hours Prime Stable with Custom FFTs of 128 - 2048k but as soon as I started browsing the interwebs it bluescreened (after closing Prime)
I am aware that the BSOD 124 tends to be related to VCORE issues, but as I said - its fine during Prime95 but not during normal tasks and VCORE tends to Droop to 1.296v on load so it shouldnt be an Issue with a Lack of VCORE.
I currently have -
- LLC on Ultra High
- VRM @ 350khz
- Phase Control on Extreme
- Duty Control on Extreme
- C1 Disabled
- C3 & C6 Enabled
- PLL overvoltage enabled
- Turbo disabled (4.5Ghz on all Cores)
- Memory on 1.65v
- PLL Votage on 1.875
- Speedstep Enabled
- EPU Disabled
Any suggestions?
[EDIT] Kill the Duplicate thread
I've been having some bizzare difficulties whilst overclocking my new 2500k.
I currently have it at a fixed voltage of 1.34v @ 4.5ghz for stability.
I had it at 1.3v 2 hours Prime Stable with Custom FFTs of 128 - 2048k but as soon as I started browsing the interwebs it bluescreened (after closing Prime)
I am aware that the BSOD 124 tends to be related to VCORE issues, but as I said - its fine during Prime95 but not during normal tasks and VCORE tends to Droop to 1.296v on load so it shouldnt be an Issue with a Lack of VCORE.
I currently have -
- LLC on Ultra High
- VRM @ 350khz
- Phase Control on Extreme
- Duty Control on Extreme
- C1 Disabled
- C3 & C6 Enabled
- PLL overvoltage enabled
- Turbo disabled (4.5Ghz on all Cores)
- Memory on 1.65v
- PLL Votage on 1.875
- Speedstep Enabled
- EPU Disabled
Any suggestions?
[EDIT] Kill the Duplicate thread