Hello,
I seem to have a strange problem and dont really know what to look for to solve it.
I just upgraded from ryzen 3 1200 to ryzen 5 2600x on a gigabyte ab350m-h3v
I had to also update the bios to F20, the first version that supports 2xxx series (i didnt skip any version).
It just powers off at random moments(w/o any bsod or any sign) or at full threaded stress tests.
My observations are
-Idle temps kinda high 50ish
-load i cant even see because as soon as i prees start test it powers off
-at ryzen master edc seems abnormally high 90ish % on idle
-memory tests are fine and memory stress test dont cause anything, just loke gpu tests
-everything at stock
-stock cooler
Psu is a corsair cx 550 relatively new doubt it can cause any problem
-Graphics card is rx 570 totally working
-ram is 1 stick 8gb (xmp is at 1.35V 3000MHz) and changing slot does nothing
-I doubt its the temps, cause airflow is decent, (gpu is 67°C max), and also stock cooler should be good for not overclocking.. Also it dies instantly as i press start and not some seconds after warming up.
Even weirder is that single core tests (occtp for example) seem to work fine with that load reaching 65°C
It has been very confusing and annoying and have no clue what to do now..
I seem to have a strange problem and dont really know what to look for to solve it.
I just upgraded from ryzen 3 1200 to ryzen 5 2600x on a gigabyte ab350m-h3v
I had to also update the bios to F20, the first version that supports 2xxx series (i didnt skip any version).
It just powers off at random moments(w/o any bsod or any sign) or at full threaded stress tests.
My observations are
-Idle temps kinda high 50ish
-load i cant even see because as soon as i prees start test it powers off
-at ryzen master edc seems abnormally high 90ish % on idle
-memory tests are fine and memory stress test dont cause anything, just loke gpu tests
-everything at stock
-stock cooler
Psu is a corsair cx 550 relatively new doubt it can cause any problem
-Graphics card is rx 570 totally working
-ram is 1 stick 8gb (xmp is at 1.35V 3000MHz) and changing slot does nothing
-I doubt its the temps, cause airflow is decent, (gpu is 67°C max), and also stock cooler should be good for not overclocking.. Also it dies instantly as i press start and not some seconds after warming up.
Even weirder is that single core tests (occtp for example) seem to work fine with that load reaching 65°C
It has been very confusing and annoying and have no clue what to do now..