Hello,recently I get hit by so many issues with my PC...
I got a new problem!
My 2x8gb kit recently has stoped working somehow ,or it's a settings/software issue, I hope some1 can help me out!
Here is my setup:
r5 1600 (not OC'd yet)
b350 tomahawk
2x8gb Vengeance LPX 3200mh from Corsair
Some 700w PSU
GTX 1060 6gb
What happened ? I had some issue with BSOD recently which I solved by updating the BIOS to the latest version, but last night I've noticed that my RAM is reading only 1 stick, when I start the PC it gave me some message that I havent correctly chosen my DIMM slot and to replace it to A1 (first slot for single chanel RAM), after some research ,I couldnt fix it...
Win 10 updated,BIOS updated, both sticks work ,tested 1 by 1, I've reseted CMOS with the jummper,used XMP profile (didnt want to boot with it) swiched couple slots with my sticks randomly, reseted manually the bios settings,SCONFIG > BOOT > ADVANCED the box is UN CHECKED
for the RAM use...
What I belive it could be affected by: win 10 update, BIOS update, and I used caned air to clean it of dust ,recently(2-3day's ago),everything was pluged out ,I didnt remove the RAM while blowing air around,and I am sure it worked after I cleaned it just fine! So anyone got an solution to this problem ,or what I could try to fix it ? I' have read some posts on other forums , and no solution helped me atm..
I got a new problem!
My 2x8gb kit recently has stoped working somehow ,or it's a settings/software issue, I hope some1 can help me out!
Here is my setup:
r5 1600 (not OC'd yet)
b350 tomahawk
2x8gb Vengeance LPX 3200mh from Corsair
Some 700w PSU
GTX 1060 6gb
What happened ? I had some issue with BSOD recently which I solved by updating the BIOS to the latest version, but last night I've noticed that my RAM is reading only 1 stick, when I start the PC it gave me some message that I havent correctly chosen my DIMM slot and to replace it to A1 (first slot for single chanel RAM), after some research ,I couldnt fix it...
Win 10 updated,BIOS updated, both sticks work ,tested 1 by 1, I've reseted CMOS with the jummper,used XMP profile (didnt want to boot with it) swiched couple slots with my sticks randomly, reseted manually the bios settings,SCONFIG > BOOT > ADVANCED the box is UN CHECKED
for the RAM use...
What I belive it could be affected by: win 10 update, BIOS update, and I used caned air to clean it of dust ,recently(2-3day's ago),everything was pluged out ,I didnt remove the RAM while blowing air around,and I am sure it worked after I cleaned it just fine! So anyone got an solution to this problem ,or what I could try to fix it ? I' have read some posts on other forums , and no solution helped me atm..