G
Guest
Guest
Hello,
I have been facing a problem with my P4 cpu.I have a P4 3.0E Ghz with 1Mb L2 Cache and 800Mhz FSB with stepping 4 and revision D0.But when I checked using intel processor identification tool and cpu-z it says the cpu is working at 1.99-2.0Ghz and 532-533FSB while it should be running at 3.0/800.The motherboard is a China made motherboard ZX-945-15 with intel 915 chipset and revision B1.It has AMI bios.The board also supports667MHZ dual channel DDR2 ram.But Cpu-z is showing the channel as single.Even the ram works at Dram freq of 200mhz and FSB: DRAM of 2:3.The DDR2 ram I'm using is OCZ Platinum dual channel kit rated at 800Mhz and can be overclocked further.When booting the Bios identifies the cpu properly and 3.0ghz but when testing with the softwares it shows 3.0 ghz working at 2.0ghz.What might be the problem.Thanks
Specs
Cpu- P4 3.0E Ghz 800mb Fsb 1 mb L2 cache stepping 4 rev D0 Socket 478
Motherboard- ZX-945-15
Ram- Ocz platinum rev 2, 2Gb dual channel kit
Powersupply- Corsair Tx650
I have been facing a problem with my P4 cpu.I have a P4 3.0E Ghz with 1Mb L2 Cache and 800Mhz FSB with stepping 4 and revision D0.But when I checked using intel processor identification tool and cpu-z it says the cpu is working at 1.99-2.0Ghz and 532-533FSB while it should be running at 3.0/800.The motherboard is a China made motherboard ZX-945-15 with intel 915 chipset and revision B1.It has AMI bios.The board also supports667MHZ dual channel DDR2 ram.But Cpu-z is showing the channel as single.Even the ram works at Dram freq of 200mhz and FSB: DRAM of 2:3.The DDR2 ram I'm using is OCZ Platinum dual channel kit rated at 800Mhz and can be overclocked further.When booting the Bios identifies the cpu properly and 3.0ghz but when testing with the softwares it shows 3.0 ghz working at 2.0ghz.What might be the problem.Thanks
Specs
Cpu- P4 3.0E Ghz 800mb Fsb 1 mb L2 cache stepping 4 rev D0 Socket 478
Motherboard- ZX-945-15
Ram- Ocz platinum rev 2, 2Gb dual channel kit
Powersupply- Corsair Tx650