3 beeps no post

[mihael12]

hello,i recently buyed the asrock fm288x pro+ and wont start it beeps 3 times. i replaced the ram and my cpu is amd a8 5600k be.can u guis help me.

 

[alexoiu]

Hi, Try testing with single RAM module each slot. Make sure that the RAM module is properly inserted.

 

[kgrevemberg]

Condition/ Beeps Code /Debug Code
Normal /1 short beep after POST /With goodnight LED enabled, debug code will disappear after the beep.
Bad CPU/ No beep No /debug code
Bad memory/ No beep/ 45
Without memory /3 long beeps /53
Without CPU/ No beep(No Power)/ No debug code
Without VGA card /5 long beeps Beeps at”d6”, then show "0d"

 

[mihael12]

iw tried and nothing stil 3 short beeps.when i try without ram the beeping stops

 

[alexoiu]

Try starting the board outside the case, only CPU and CPU fan installed. See if any beeps.

 

[mihael12]

no beeps with only cpu.

 

[alexoiu]

Try re-seating the CPU, check if any bent pins and if ok, try testing again outside the case, with stock CPU cooler.

 

[mihael12]

iw tried no beeping.

 

[alexoiu]

Then I'd RMA both motherboard and CPU.

 

[mihael12]

so u think that the mobo and the cpu are gone?

 

[alexoiu]

If the case speaker is properly connected, the CPU fan does spin when starting the board, and no beeps with no RAMs, then either the board or CPU does not work.

 

[mihael12]

i instaled the cpu on another mobo and without ram only cpu on board beeps 3 times

 

[mihael12]

can u know how to clean the cpu pins they are full of thermal paste

 

[alexoiu]

Let it dry?