- Jan 3, 2013
- 4
- 0
- 10,510
Problem:
I have 4x16Gb corsair vengeance on my P8ZZ7-V Pro MOBO
I have had it working with all 4 RAM before...
However it's got to the stage where I started getting blue screens.
From trouble shooting It seems all memory runs fine by itself and in pairs. On various slots.
But once 3 or more is used I get OA, 3D and 3B bugchecks
When all 4 are used it doesn't even start.
Additional information:
I have gone into the bios and set everything to default.
Also to a while ago I tried asus auto tune up.
Somtimes after a crash I get a new startup window saying overclocking has failed. Even though i had not attempted one.
Example:
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Sat 02/03/2013 01:21:15 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030213-11949-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0xA (0xFFFFFA8087FDD218, 0x2, 0x0, 0xFFFFF80002E8C0A8)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
I have 4x16Gb corsair vengeance on my P8ZZ7-V Pro MOBO
I have had it working with all 4 RAM before...
However it's got to the stage where I started getting blue screens.
From trouble shooting It seems all memory runs fine by itself and in pairs. On various slots.
But once 3 or more is used I get OA, 3D and 3B bugchecks
When all 4 are used it doesn't even start.
Additional information:
I have gone into the bios and set everything to default.
Also to a while ago I tried asus auto tune up.
Somtimes after a crash I get a new startup window saying overclocking has failed. Even though i had not attempted one.
Example:
Crash dump directory: C:\Windows\Minidump
Crash dumps are enabled on your computer.
On Sat 02/03/2013 01:21:15 GMT your computer crashed
crash dump file: C:\Windows\Minidump\030213-11949-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0xA (0xFFFFFA8087FDD218, 0x2, 0x0, 0xFFFFF80002E8C0A8)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Facebook
Twitter
Instagram