3-pin molex to what?

[ComputerKid1234]

Here are some pictures of the cables other end.

So the problem is that I don't know what it is called, the plugging of the pictures.
Any help? I would also appreciate if somebody could link me a trustful website where I can buy cable like that.
Other end is 3-pin molex and other end is that what ever it is.

Thank you!

Fixed images - Someone Somewhere

 

[Someone Somewhere]

It looks like a JST connector. Generally used for balance charging LiPo batteries.

I don't know of three-pin moles, though.

 

[ComputerKid1234]

It looks like a JST connector. Generally used for balance charging LiPo batteries.

I don't know of three-pin moles, though.

Ummm.. I have been using it as in the fan controller which came with the case I bought (NZXT H2, silent)
I mean.. I haven't touched the whole damn fan control system till today and I was surprised what was that plugging.

 

[Someone Somewhere]

Interesting - those two arrow retention clips are definitely JSTs.

Mind posting a pic of the other end? Are we talking a standard 3-pin fan connector, or something else?

 

[ComputerKid1234]

Interesting - those two arrow retention clips are definitely JSTs.

Mind posting a pic of the other end? Are we talking a standard 3-pin fan connector, or something else?

Sure, here's the other end! (and yes its broken)
http://imgur.com/H2gr0Qa,9CZWU89,HZCoLKB#0
http://imgur.com/H2gr0Qa,9CZWU89,HZCoLKB#1
http://imgur.com/H2gr0Qa,9CZWU89,HZCoLKB#2

 

[Someone Somewhere]

Ah, OK. They're only grabbing one of the two grounds; that's why it's only got three pins connected.

Can you check whether the pin spacing on the end is 2mm or 0.1"?

 

[ComputerKid1234]

Ah, OK. They're only grabbing one of the two grounds; that's why it's only got three pins connected.

Can you check whether the pin spacing on the end is 2mm or 0.1"?

I checked that it's 2mm

 

[Someone Somewhere]

OK, not a standard JST. Metric ones are a bit harder to come by.

While I can almost certainly find someone selling the wire, it isn't necessarily going to be wired right for what you want.

I'd repair the existing one; grab a soldering iron and re-attach it. That or call up NZXT and get a replacement under warranty.

 

[ComputerKid1234]

OK, not a standard JST. Metric ones are a bit harder to come by.

While I can almost certainly find someone selling the wire, it isn't necessarily going to be wired right for what you want.

I'd repair the existing one; grab a soldering iron and re-attach it. That or call up NZXT and get a replacement under warranty.

I'am worried I might not get it replaced because of all the soldering I've already done for it.. There was some problems with the other part of the fan controller, the other wires which go for the fans. They were melted so I had to solder them back together and used electronic tape.. And I have also changed the fans..
ANYWAY!
I wish I could buy a new one of those cables with the (as u say) a JST end and 3-pin molex on the other end, to replace the broken one

(Yes this is wierd answer) feel free to ask something if you didn't understand!