- Dec 30, 2018
- 2
- 0
- 10
I am a video editor using Prmiere Pro CC.
I have a gigabyte x79-ud5 mother board and have been using a hhd for OS and programs, a raid 0 for media, and a raid 0 for scratch, preview, etc.
I am now finding this setup to be abit slow for 4k video so I am upgrading to sata ssd drives. My question here, if possible to answer, is my mother board has 2 sata 3/6gb connections which I would use for OS drive and Media drive since these go direct to the intel x79 chipset. The other sata 6gb connections use marvel chipset and go through a pci express bus. Will it be ok to use the marvell sata for scratch even though some say it is a lil slower? Trying to avoid a bottle neck here.
Thank you for your ears.
David
Here is board diagram: ftp://download.gigabyte.ru/manual/mb_manual_ga-x79-ud5_e.pdf
I have a gigabyte x79-ud5 mother board and have been using a hhd for OS and programs, a raid 0 for media, and a raid 0 for scratch, preview, etc.
I am now finding this setup to be abit slow for 4k video so I am upgrading to sata ssd drives. My question here, if possible to answer, is my mother board has 2 sata 3/6gb connections which I would use for OS drive and Media drive since these go direct to the intel x79 chipset. The other sata 6gb connections use marvel chipset and go through a pci express bus. Will it be ok to use the marvell sata for scratch even though some say it is a lil slower? Trying to avoid a bottle neck here.
Thank you for your ears.
David
Here is board diagram: ftp://download.gigabyte.ru/manual/mb_manual_ga-x79-ud5_e.pdf
Facebook
Twitter
Instagram