Perhaps my PC Brothers can come in clutch here. I am looking to upgrade my GPU to a 3090 which is within my budget for professional work. I have an option between choosing an apparent brand new unopened 3090FE or a used 3090 Suprim X from MSI for similar prices. Obviously the FE sounds like a no brainer being new however I do have some concerns which I will elaborate on. Firstly does anyone know perhaps with first hand experience if the MSI 3090 Suprim X or the 3090FE will fit in the Corsair 4000D airflow case. From my research I believe the 3090 FE should but I would like to know if the Suprim X will too?
I know Nvadia recommends 750W as a minimum for the 3090s but I would get a 850 instead. Am I safe with an 850W for intensive AI model work? I have no interest in mining but I am not sure how power intensive heavy AI pushing work that uses a lot of Vram is. FE looks like 85W is fine however Suprim is a power hungry beast going off PC part picker.
On the topic of Vram I have heard that the FE Vram does get very hot compared to the Suprim. Will it get very hot with Ai work like mining and potentially throttle or is it a non issue or can easily be solved with some DIY tinkering
Lastly as I am located in Europe so I am always wary on what card is more efficient and comes with lower power bills. I would think the FE would be but looking at a few articles its hard to tell. Only think that cause of the Suprim wattage draw on PC part picker.
My rig with GPUS thrown in.
PCPartPicker Part List
PCPartPicker Part List
I know Nvadia recommends 750W as a minimum for the 3090s but I would get a 850 instead. Am I safe with an 850W for intensive AI model work? I have no interest in mining but I am not sure how power intensive heavy AI pushing work that uses a lot of Vram is. FE looks like 85W is fine however Suprim is a power hungry beast going off PC part picker.
On the topic of Vram I have heard that the FE Vram does get very hot compared to the Suprim. Will it get very hot with Ai work like mining and potentially throttle or is it a non issue or can easily be solved with some DIY tinkering
Lastly as I am located in Europe so I am always wary on what card is more efficient and comes with lower power bills. I would think the FE would be but looking at a few articles its hard to tell. Only think that cause of the Suprim wattage draw on PC part picker.
My rig with GPUS thrown in.
PCPartPicker Part List
PCPartPicker Part List
Facebook
Twitter
Instagram