Hi. We are super noob on pc build.
When my son use 4 ram sticks (32gb total) of his Tforce xcalibur ram. His games freezes, crash, graphic card crash and BSOD.
But when he only use 2 ram sticks(16gb total), no crash or no issue is experienced.
Does this mean that using 4 ram sticks is not compatible with his built? Or does he need to set up his ram manually? Thank you
PC Specs:
TForce xcalibur 16gb 2x8gb 3600 (two kits)
Ryzen 5 3600
Msi Mag B550 Mortar
Zotac RTX 2060 twin fan 6gb
Corsair 750rm 80 gold
Samsung evo 860 250gb ssd
Seagate 2tb hdd
Ram stock Cas Latency = 18-22-22-42
Voltage - 1.35v
Bios reads (not on any xmp profile):
On 2 sticks:
Dram Frequency is 2400hz
Voltage: 1.26
On 4 sticks:
Dram Frequency is 3600hz
Voltage: 1.26
Both With timing config of:
Command rate - 1 (auto)
tCL - 16 (auto)
tRCDRD - 16 (auto)
tRCDWR - 16 (auto)
tTRP - 16 (auto)
tRAS - 39 (auto)
Thank you in advance
When my son use 4 ram sticks (32gb total) of his Tforce xcalibur ram. His games freezes, crash, graphic card crash and BSOD.
But when he only use 2 ram sticks(16gb total), no crash or no issue is experienced.
Does this mean that using 4 ram sticks is not compatible with his built? Or does he need to set up his ram manually? Thank you
PC Specs:
TForce xcalibur 16gb 2x8gb 3600 (two kits)
Ryzen 5 3600
Msi Mag B550 Mortar
Zotac RTX 2060 twin fan 6gb
Corsair 750rm 80 gold
Samsung evo 860 250gb ssd
Seagate 2tb hdd
Ram stock Cas Latency = 18-22-22-42
Voltage - 1.35v
Bios reads (not on any xmp profile):
On 2 sticks:
Dram Frequency is 2400hz
Voltage: 1.26
On 4 sticks:
Dram Frequency is 3600hz
Voltage: 1.26
Both With timing config of:
Command rate - 1 (auto)
tCL - 16 (auto)
tRCDRD - 16 (auto)
tRCDWR - 16 (auto)
tTRP - 16 (auto)
tRAS - 39 (auto)
Thank you in advance
Last edited: