[SOLVED] 3600MHZ Ram

[SeekoZaLegend]

I bought a 3600 RAM for my i7 11700k.
I found out later that it is running at 2400Mhz
Now when I tried the XPM profile 1. I had the bios error.

Is it fine to sit the Ram manually at 3200 ?

 

[JohnBonhamsGhost]

I had the bios error.

what BIOS error?

list your complete system specs when asking for system help which includes make & model for all components.

 

[SeekoZaLegend]

NZXT H710 Case
ArcticFreezer Cooler 280
i7 11700k
Gigabyte z590 auros Elite AX
RAM 16GB 3600Mhz


Im getting a boot failure detected when I sit XMP profile 1

Note > I have used the first slot and a third slot for my RAMS.

 

[JohnBonhamsGhost]

RAM 16GB 3600Mhz

this isn't the make & model. just a very generic description of RAM.
and i would guess you meant the Z570 version of this motherboard, there are a few others.

 

[SeekoZaLegend]

Sorry .
Its HyperX Fury Black 16 GB DDR4 3600MHz

z590 motherboard

 

[JohnBonhamsGhost]

they are a Gigabyte officially support set.

if the board offers both XMP I & XMP II, try XMP II.
XMP I is supposed to be a Gigabyte "optimized" profile.
could be some minor adjustments that don't sit well with the system.

you can also try manually entering all of the manufacturer rated specs.
very rarely the XMP profiles just don't clock right.

my next move would be to try them in another system and see if they work at proper speeds.
and do the same with another set in yours.

 

[Bob.B]

NZXT H710 Case
ArcticFreezer Cooler 280
i7 11700k
Gigabyte z590 auros Elite AX
RAM 16GB 3600Mhz


Im getting a boot failure detected when I sit XMP profile 1

Note > I have used the first slot and a third slot for my RAMS.

First and third slots only means something to you as only you can see what your talking about.

Look in the manual for a pic to show the proper slots to use.

Get the latest bios...non-beta.

 

[SeekoZaLegend]

I have only 2 profiles
first profile for 3600Mhz
second profile for2990 Mhz

Can I set the speed manually without XPM Profile ?

 

[SeekoZaLegend]

https://ibb.co/L0cMLV3

So in this manual image for my Z590 motherboard, it says that I have the rams supported for the motherboard.

I found that my motherboard running Bios version F3 or 3.3. which is old compared to what I saw on the website that they have Bios F6.

So can be the reason that my Rams XPM profile 1 not working because of the Bios version?

In Bios F6 they did update the motherboard for higher RAM Mhz for 11th gen CPUs.