so, I just start building like 2 weeks ago. and notice I can't have a stable thermal performance on my 3900x. it's not that I want to overclock or something.. I just want default performance with stable temp.
so, for a stater, just at the start, my CPU temp is at 70C. I just don't feel it right.. and when I do try stressing it, it's just increasing. When I use manual, default or underclocked, after 5-8 sec and it already hit 100++C. when I use PBO, and even Eco Mode, it thermal throttled.. its good because the temp not going to exceed 95C, but the clock is decreasing constantly to under 2000MHz. I already tried turning off the multithread, same result. even the turn off the core so I only use 6 core. same result.
Is it true if I assume that I did some mistake when applying my cooler?.
I am using stock Cooler, so, AMD Wraith Prism.. with applied thermal paste.. the thermal paste in the box with wraith prism. I'm also using 4x16gb 3600 ram.. if that is also the prob (?).. some people say to volt it to get better temp.. but I'm not doing it yet.
I'm new here, I can't put picture yet.. lol..
so this is my idle stat when PBO on
CPU 1.3++V (PBO so...)
CPU under 1000mhz (Idle)
Temp 74-75
When Stressing with PBO
CPU from 1.3 decreasing to 0.9 constantly it takes like 3-5 sec
Temp Throttle, if I turn off throttle then it shut down because of overheat
so, for a stater, just at the start, my CPU temp is at 70C. I just don't feel it right.. and when I do try stressing it, it's just increasing. When I use manual, default or underclocked, after 5-8 sec and it already hit 100++C. when I use PBO, and even Eco Mode, it thermal throttled.. its good because the temp not going to exceed 95C, but the clock is decreasing constantly to under 2000MHz. I already tried turning off the multithread, same result. even the turn off the core so I only use 6 core. same result.
Is it true if I assume that I did some mistake when applying my cooler?.
I am using stock Cooler, so, AMD Wraith Prism.. with applied thermal paste.. the thermal paste in the box with wraith prism. I'm also using 4x16gb 3600 ram.. if that is also the prob (?).. some people say to volt it to get better temp.. but I'm not doing it yet.
I'm new here, I can't put picture yet.. lol..
so this is my idle stat when PBO on
CPU 1.3++V (PBO so...)
CPU under 1000mhz (Idle)
Temp 74-75
When Stressing with PBO
CPU from 1.3 decreasing to 0.9 constantly it takes like 3-5 sec
Temp Throttle, if I turn off throttle then it shut down because of overheat