Question 3M tape

Ralston18

Titan
Moderator
The purpose of tape is to install the controller somewhere in your build.

You first place the tape (one side unpeeled) on the controller and then unpeal the other side of the tape and stick the controller into the desired location.

However if the controller is or can otherwise be securely placed you do not need the tape.

Most times ( 3M product label aside) the tape will dry and what ever is or was being held will fall loose.

For example the following video link shows the controller stuck to the left at about 1:30 or so.

View: https://www.youtube.com/watch?v=9VTbQ1Z7djs


Look for other videos that may directly show the application and use of the tape.

Look in the Controller's Installation Guide/Manual for specific instructions and warnings.
 

ASK THE COMMUNITY

TRENDING THREADS