[SOLVED] 3M tape

[harpsinuno]

I don't know what is the function of this double coated tissue tape... It came with commander pro.

 

[JohnBonhamsGhost]

probably to install the Commander.
this way you can place it in any area you desire that has a flat surface to stick to where screw holes may not be available.

 

[Ralston18]

The purpose of tape is to install the controller somewhere in your build.

You first place the tape (one side unpeeled) on the controller and then unpeal the other side of the tape and stick the controller into the desired location.

However if the controller is or can otherwise be securely placed you do not need the tape.

Most times ( 3M product label aside) the tape will dry and what ever is or was being held will fall loose.

For example the following video link shows the controller stuck to the left at about 1:30 or so.

View: https://www.youtube.com/watch?v=9VTbQ1Z7djs


Look for other videos that may directly show the application and use of the tape.

Look in the Controller's Installation Guide/Manual for specific instructions and warnings.