Question 3pin ARGB female of AIO to/via 3pin ARGB HUB?

[Bittu11]

I have

Cabinet: NZXT Phantom 410

Fan Kit: Zebronics ZEB - PGF510C with 3pin ARGB Fan HUB(comes with remote controller) https://www.amazon.in/gp/aw/d/B09GF928RK/ref=ox_sc_act_image_1?smid=A14CZOWI0VEHLG&psc=1

AIO : MSI MAG Core Liquid 240R
https://www.amazon.in/gp/aw/d/B087YXWFTK/ref=ox_sc_act_image_1?smid=A1Q09H46LCFUVC&psc=1

MotherBoard: Asus TUF Gaming Z590 Plus(without wifi)

Query: Curious if it is do'able/advisable to connect the female 3pin ARGB coming out of AIO Unit to/via 3Pin ARGB Hub which came with the fan kit above, so as to bring the color scheme of AIO under that remote provided that fan kit.

But i'm afraid what if connecting like that might blow up that port/header on motherboard, due to some extra load on baord's 3pin ARGB header may be? Or any other pros/cons(if any) of that sort of connection that I should be aware of?

Would you advise doing connection like that?

Thanks!

 

[Lutfij]

You have two headers for ARGB on your motherboard, as shown on the motherboard diagram in your motherboard manual, page - x(roman for 10), ADD_Gen2_1 and ADD_Gen2_2 which is how I'd tether the two ARGB connectors to the motherboard. You could also pair it with the hub from the fan kit.

 

[Bittu11]

You have two headers for ARGB on your motherboard, as shown on the motherboard diagram in your motherboard manual, page - x(roman for 10), ADD_Gen2_1 and ADD_Gen2_2 which is how I'd tether the two ARGB connectors to the motherboard. You could also pair it with the hub from the fan kit.

Yes, i referred the manual & checked on board also before posting it here; after noticing all these ports together, doingthat whole thing came to my mind.

So, it wont have any cons, like blowing up/shorting anything or any ports inside my built? Safe to proceed with aio 3pin through fan? Or just go with ports on board~ the conventional way!