4 pin front panel connector on gigabyte b250 ds3h

[MEL1315]

Hi guys, i was assembling my new build. Do you know where the 4-pin single connector from front panel connect on this motherboard? It has too many pins for front panel connector. Any help please?

 

[boju]

Whats the 4pin for, case fan? Audio? What's your case?

 

[SkyNetRising]

Read manual - page 16.
https://www.gigabyte.com/us/Motherboard/GA-B250M-DS3H-rev-10#support-manual

 

[MEL1315]

I have a very old case. It comes from the front panel. Not case fan. I have 3 cables coming from front panel- audio, usb 2.0, and this pin. So where will this go?

 

[SkyNetRising]

4 pin - probably speaker. Can you show photo of the connector?

 

[MEL1315]

Like i said, i don't have separate cables like power led, power switch, reset switch etc. All i have is a 4pin (in a single line) unmarked (except a white dot, probably indicating +) cable. So where should i plug it?

 

[MEL1315]

This is what I'm talking abt- http://imgur.com/z697Lnp

 

[boju]

I have a very old case. It comes from the front panel. Not case fan. I have 3 cables coming from front panel- audio, usb 2.0, and this pin. So where will this go?

Have you identified which cables are for audio and usb2 and i assume are plugged into the motherboard? What other features does your case have at the front besides audio and usb?

Hard to say where this cable belongs without knowing what it connects to

 

[SkyNetRising]

This is what I'm talking abt- http://imgur.com/z697Lnp

That looks like plug for internal USB 2.0 connector (single usb 2.0 port) - could be connected to a bluetooth device or something similar.

 

[MEL1315]

Guys, I've sorted it out. No it's not audio or usb 2.0 port. It is the front panel connector itslef. I plugged it in ports 1,3,5,7 in the earlier diagram by SkyNetRising.

Thank you guys.