Question 4 pin PWM control to 3 pin voltage control

[57bel]

Hello,
Anyone know of any hubs or controllers that take a 4 pin fan header pwm signal and convert it to a 3 pin voltage control header? Trying to control a 3 pin fan with a 4 pin pwm header.
Thanks for reading,
57bel

 

[Lutfij]

Phanteks make a fun hub whereby you can connect PWM and 3pin fans to it. I have it in my Enthoo Evolv itx(the original version, without the tampered glass side).

 

[57bel]

Phanteks make a fun hub whereby you can connect PWM and 3pin fans to it. I have it in my Enthoo Evolv itx(the original version, without the tampered glass side).

Thanks for reply! The first gen is no longer built. They have a second gen and it looks like it should be able to control using a 4 pin pwm fan header! Thanks for the tip!

 

[Paperdoc]

You are right. The new unit is the Phanteks Universal Fan Controller, PH-PWHUB_02

https://www.amazon.com/Phanteks-Uni...3441&sprefix=Phanteks+Universal,aps,99&sr=8-1

It WILL do the job for you, and can do more that you don't need. It will automatically adjust to INPUT of a control signal set from a mobo header in either the older Voltage Control Mode or the new PWM Mode. It has two groups of output ports - 3-pin and 4-pin - and you choose according to your fan type. NOTE that Port 1 will automatically adjust itself to whichever type of fan is plugged in there. BUT it is the ONLY output port that sends its fan's speed signal back to the host header, so you SHOULD plug one fan into that port, even if the port has 4 pins.