4850x2 crysis BIG PROB

[damienG]

hello, i just benched crysis, the results were: 4850X2 CF OFF = 17FPS AVG
4850X2 CF ON = 16FPS AVG

heh?? well i know thats not normal!!!! whats going on !! im on CCC 9.8 PLS HELP

 

[damienG]

TESTED EVERY GAME, RESULTS ALL SLIGHTLY HIGHER WITHOUT CFX + FLASHING TEXTURES IN SOME GAMES

 

[microterf]

Depending on what resolution you're running at, that's about what your'e going to get with a 4850x2,

 

[nonxcarbonx]

something else is probably bottlenecking it like a cpu

 

[damienG]

i play @ 1680x1050 and 1080p, my cpu is a QX6700 @ 3.8ghzn this makes no sense as iv seen this card perform past 280 standards in crysis @ 1080p and 1680x1050

 

[dndhatcher]

Did you turn antialiasing off? Often that uses enough Video RAM to cause problems.

 

[Guest]

http://www.firingsquad.com/hardware/sapphire_radeon_4850_x2_review/page4.asp
http://www.techpowerup.com/reviews/Sapphire/HD_4850_X2/9.html
Depending on hardware? Here are some links to compare with.

 

[invisik]

Give us your system spec. And what are your setting for crysis?

 

[Guest]

System details please. 😀

 

[smoggy12345]

Yes this is very wrong....sound like only one card is being utilised.

I get around 17FPS on v.high @ 1920x1200 on very high with the setup SLI'd 8800's

 

[werxen]

or maybe you are cranking up all the settings lol.... make sure u turn AA and AS filtering OFF - your card cannot handle either at that resolution.

 

[damienG]

VERY HIGH AA OFF QX6 @ 3.8GZ 6GB BALISTIX 1066

 

[damienG]

Hmmm...your profile says Q6600 at 4ghz....cough cough.....and now you say you have a QX6700 at 3.8ghz....cough cough....

Q6600 was in my 9600gt rig witch has 2gb ram its a fujitsu scaleo p COUGH COUGH

 

[damienG]

a guy from saphire told me to keep reinstalling and sweeping the drivers, and monitor performance, everything is GOOD now, thx 4 helping out





Q6600 = OLD RIG (9600gt) QX6700 = NEW RIG (4850x2)

 

[cobra5000]

Depending on what resolution you're running at, that's about what your'e going to get with a 4850x2,

If you dont know what your talking about, it does not help to leave a comment based in ignorance.

 

[microterf]

If you dont know what your talking about, it does not help to leave a comment based in ignorance.

This quote was based on my using 4850s in Xfire. As with the Xfire off and on, I'm using trifire now, 4870x2+ 4870, and with that x2, you cannot disable it w/o disabling A.I. Without any settings known, or resolution, it is very possible to get 17fps or lower in crysis with a 4850x2. So no, the comment is based on ignorance (not IN ignorance)

 

[cobra5000]

This quote was based on my using 4850s in Xfire. As with the Xfire off and on, I'm using trifire now, 4870x2+ 4870, and with that x2, you cannot disable it w/o disabling A.I. Without any settings known, or resolution, it is very possible to get 17fps or lower in crysis with a 4850x2. So no, the comment is based on ignorance (not IN ignorance)

Well, in or on, one of my rigs has a single 4850 and another has two 3870 toxic cards. They both run Crysis at higher frame rates. This is, clearly, a driver issue. Mr smartypants

 

[microterf]

Well, in or on, one of my rigs has a single 4850 and another has two 3870 toxic cards. They both run Crysis at higher frame rates. This is, clearly, a driver issue. Mr smartypants

Based on the information he gave us
(
hello, i just benched crysis, the results were: 4850X2 CF OFF = 17FPS AVG
4850X2 CF ON = 16FPS AVG

heh?? well i know thats not normal!!!! whats going on !! im on CCC 9.8 PLS HELP)

I believe my response was accurate w/o knowing resolution/ or settings. As for your statement about you getting higher frame rates, We both know that you are not getting over 17fps with 1 4850 @1920*1200 with 4xAA and ultra high too.