No they look fine. Mine is a 4000mhz kit that I after 2 weeks of tweaking I managed to get timing to CL16-16-16-34 1T @1.456v They started at 3400mhz cl20-20-22-38 2T 1.25v
You could probably get those 20's down to 18 and clocks up to 3600mhz if you increase voltage. Honestly though if you can keep those timings and get up to 3600mhz then do it because 3200mhz is low. You might need to up voltage to 1.36v
Then run memtest86, all tests and 10 passes to be safe. If it fails then up the voltage a tiny bit at a time and test again. My next step would be 1.365v
Oh and don't forget to raise the fclk to half the memory speed when you go to 3600mhz.