600 celeron@928

[Guest]

Just put a celery600 into my abit bh6 and ran it right up to 928. No problems with overclocking but fitment of slotket card a real challenge. That should last me another couple of years. Sucess is sweet.

 

[r2k]

What's the Vcore?My friend has one and he's daring to go as high as possible...Then again he's installed it on an IWill WO2 (i815E Chipset) which allows 66-200 MHz in 1 MHz increments but voltage tweaks by jumpers.His milage will vary I suppose...

 

[Guest]

Im running at 1.65v, default is 1.70. I just tried to go up to 112mhz but got cpu errors. <A HREF="http://www.overclockers.com.au/pcdb/" target="_new">HERE </A>is a page you can see what others are setting their vcore to and at what speeds. Just type in what you want to search by.


"They called it PMS cause the term MAD COW DESEASE was already taken!"

 

[Guest]

Nice! Try for some better cooling and go for the 112 FSB.
Was your CPU retail or OEM? And was it a cB0 or cC0 stepping (or just the Intel S-spec) out of curiosity?