- May 12, 2022
- 2
- 0
- 10
This is the first time I'm buiding a computer, I'm using these parts:
Motherboard: H610M
Processor: i3 12100f
Card: RX 6500 XT
Ram: 8GB DDR4 3200
PSU: 80+ 600w Corsair
The problem is, the computer has no video, when I turn it on, everything lights up, the fans spin, but no video.
In the motherboard debug leds it doesn't get stuck at any particular point, it just goes through, but after all lights blink in sequence, the motherboard starts to play bips, 8 bips which according to this motherboard is something like "display memory failure".
I already swaped the ram, reinserted the processor, checked if the card was really pressed into the pci-e, even removed the bios battery for sometime, but no result.
I have an older computer and I tried to place the 6500xt on it and it worked, but that computer is pci-3, or maybe pci 2, it says pci-2 on cpuz but pci-3 in the bios...
Does anyone know what it could be or what could be tried?
Motherboard: H610M
Processor: i3 12100f
Card: RX 6500 XT
Ram: 8GB DDR4 3200
PSU: 80+ 600w Corsair
The problem is, the computer has no video, when I turn it on, everything lights up, the fans spin, but no video.
In the motherboard debug leds it doesn't get stuck at any particular point, it just goes through, but after all lights blink in sequence, the motherboard starts to play bips, 8 bips which according to this motherboard is something like "display memory failure".
I already swaped the ram, reinserted the processor, checked if the card was really pressed into the pci-e, even removed the bios battery for sometime, but no result.
I have an older computer and I tried to place the 6500xt on it and it worked, but that computer is pci-3, or maybe pci 2, it says pci-2 on cpuz but pci-3 in the bios...
Does anyone know what it could be or what could be tried?
Facebook
Twitter
Instagram