6700k slightly​ bent corner

[Korn_dingo]

So my cpu got slighty bent in the corners after I put it in a msi mobo to flash the BIOS update to support kabby lake my current mobo is a Asus sabertooth I noticed it after I took it out of the MSI board I think it happened when I closed the latch on and I was using a stock CPU cooler. and in my main I used a gtx h100i Corsair cooler and only finger tighten the cooler down so I figured it's from the MSI board caused this here is some pictures http://imgur.com/a/x2Mz5 just wondering if this could cause any problems I have put it back in my main rig and ran prim 95 Max temp was around 56-60c played games every thing seems working correctly.

 

[tanckattb]

It should be fine, and if it's working correctly then it's alright. Over time it will be straight again, just don't take it out and put it in too often.

 

[Korn_dingo]

Thanks for some info 2 days going everything working fine playing games and ran prim 95 for about 15min and temp was around 65 to 69c