6800K decent overclock?

[KevinNewbPCBuilder]

I got 4.2ghz stable at 1.325 volts, is this a good overclock for daily use? I have a h100i and the temps are around 26-30 idle and 40-50 load.

 

[JackNaylorPE]

For comparison purposes.... the H100i will run about 3C hotter than say the Noctua NH-D15, Cryorig R1 and Scyther Mugen Max

You should find useful info here:

http://www.overclock.net/t/1609973/help-how-to-overlcok-my-i7-6800k

Voltage seems high

 

[KevinNewbPCBuilder]

I selected 1.310 volts in the bios and it bluescreened within 30 minutes
Edit: Am not good at overclocking, i've only touched vcore voltage and cpu overclock in my bios

 

[JackNaylorPE]

There's more to overclocking the setting VID and CPU multiplier. For example my OC was limited by VCCIN

here's an other thread

http://www.overclock.net/t/1626358/intel-core-i7-6800k-overclocking-troubles

If you got BSOD 0x124 or system frooze that usually means you need more Vcore, (try to not go above 1.40V). If that didn't work it means you either reached a wall or your CPU needs more VCCIN/VRIN/ Input Voltage (Max 1.95). The usual BSOD if the VCCIN is too low is 0x101.

http://www.overclock.net/t/1603967/broadwell-e-overclock-leaderboard-owners-club
http://www.overclock.net/t/1601679/broadwell-e-thread
http://www.overclock.net/t/1602160/broadwell-e-overclock-questions-tips

 

[KevinNewbPCBuilder]

There's more to overclocking the setting VID and CPU multiplier. For example my OC was limited by VCCIN

here's an other thread

http://www.overclock.net/t/1626358/intel-core-i7-6800k-overclocking-troubles

If you got BSOD 0x124 or system frooze that usually means you need more Vcore, (try to not go above 1.40V). If that didn't work it means you either reached a wall or your CPU needs more VCCIN/VRIN/ Input Voltage (Max 1.95). The usual BSOD if the VCCIN is too low is 0x101.

http://www.overclock.net/t/1603967/broadwell-e-overclock-leaderboard-owners-club
http://www.overclock.net/t/1601679/broadwell-e-thread
http://www.overclock.net/t/1602160/broadwell-e-overclock-questions-tips

I tried again and computer froze, adjusting the vccin didn't help that much. Am I hitting the wall for my CPU or am I just dumb in general.