690 II Advanced Fan Setup + EVO 212

[Vyxnaar]

Here is a picture of my current set up not including 1 more 120mm Side panel fan intake blowing to my MOBO/GPU. I have 1 rear fan as an exhaust, 2 top fans exhaust, 1 front fan intake, 2 bottom of the case fans intake, and 1 side panel fan as intake because I am running an EVO 212 and it won't fit in the case. Would this air flow be right? Another question is that I currently also have an EVO 212 set up parallel to my RAM and my question is should the fan be blowing as an intake to the heatsink or as an exhaust, which way should I face the fan towards my rear or front panel? I also plan on adding another fan to the heatsink, also which way should I blow that fan too for future references.

Sorry if this is hard to understand, I am completely new at building and setting up computers in general, I have provided a picture so you can kinda see the ideal of where I am going.

P.S.
if you can draw it, that would be a lot easier for me to comprehend.

 

[offitmassive]

Morning, I have the same case, I think the reason why your evo 212 won't fit ( it's measured to fit snug in that case) is because one side fan and the rear fan on the top is in the way, I have a 120mm fan behind the cooler master badge on the front, one on top (at the front)and the rear exhaust fan behind CPU and I've got a just as big arctic cooling freezer a30 fitted with no issues. I think you may have too many fans , one on the side case isn't really needed I don't think nor is the one on the bottom of the case .