Hi everybody! Last time I made a post was for advice in what to change in my PC, now I´m testing and overclocking my CPU, and I think it is going pretty hot.
Well, I have an Athlon II x2 260 regor @ 3.2 Ghz,into a CoolerMaster Elite 430 (changed front fan intake to the rear and make it an exhaust, also I added an small and fast fan as intake on the front)
Which I overcloked to get an 3.5 Ghz on stock fan and default Voltage... Since i got a certified PSU ( i had a generic one) i feel confident in change voltage values. Now, i pulled my processor to 3.6ghz, stable overlock but i had to change the voltage to 1.5v to get it! testing with Prime95 i got 74º Celcius... And i have been reading that some CPUs work at high temps but i really cant find any post, blog or review saying that my processor can handle so much heat...
With Everest Ultimate Edition I have the next result of temp:
CPU Temperature : Max 74º C
Core 1 Temp: Max 64º C
Core 2 temp: Max 64º C
Mobo temp: Max 40º C
Everything else stay on low temperature.
I have to say, that my mobo is an ASRock N68S-C UCC.. I have been doing the overlocking from the Bios.
Now My questions are:
Should I reduce the voltage and increase the bus by 1 untill i get again 3.6Ghz with less volage?
Should I increase my voltage and clock cuz the temperatures arent that bad?
With anything else to call, I will really apreciate any help and advice
Well, I have an Athlon II x2 260 regor @ 3.2 Ghz,into a CoolerMaster Elite 430 (changed front fan intake to the rear and make it an exhaust, also I added an small and fast fan as intake on the front)
Which I overcloked to get an 3.5 Ghz on stock fan and default Voltage... Since i got a certified PSU ( i had a generic one) i feel confident in change voltage values. Now, i pulled my processor to 3.6ghz, stable overlock but i had to change the voltage to 1.5v to get it! testing with Prime95 i got 74º Celcius... And i have been reading that some CPUs work at high temps but i really cant find any post, blog or review saying that my processor can handle so much heat...
With Everest Ultimate Edition I have the next result of temp:
CPU Temperature : Max 74º C
Core 1 Temp: Max 64º C
Core 2 temp: Max 64º C
Mobo temp: Max 40º C
Everything else stay on low temperature.
I have to say, that my mobo is an ASRock N68S-C UCC.. I have been doing the overlocking from the Bios.
Now My questions are:
Should I reduce the voltage and increase the bus by 1 untill i get again 3.6Ghz with less volage?
Should I increase my voltage and clock cuz the temperatures arent that bad?
With anything else to call, I will really apreciate any help and advice