So first off, here's a dxdiag
http://www.mediafire.com/view/71y3t7jp8m8uu8l/DxDiag.txt
In summary:
• Case: NZXT Phantom White w/ Red Trim (Full Tower)
• CPU: Intel Core i5-3570k
• CPU Cooler: Asetek 550LC
• GPU: Sapphire Radeon 7970 (Factory OC at 950/1425)
• Keyboard: Sidewinder x6
• Motherboard: Asrock Z77 Extreme 4
• Mouse: SteelSeries Sensei Raw
• OS: Windows 7 64bit Home Premium
• PSU: CORSAIR TX750
• RAM: Corsair Dominator Platinum 16GB (4 x 4GB) 1866Mhz
I'm using 14.4 catalyst software suite, and the Display Driver ver. 14.10.100614.10.1006
I'm hooked up with an hdmi from my main monitor and a dvi cable from my second monitor. Both cables are new.
So basically, I'm getting bsods randomly, sometimes during a simple action on a web browser (which only happened to me once) or sometimes one hour or 6 hours after on heavy load. There were only three crashed reported, but there were about 2/3 more that didn't have a minidump file created for them.
When trying to go into BlueScreen View today, I found that none of the red errors showed up anymore. I've temporarily fixed my problem by using one monitor and unplugging the monitor connected by dvi. So far, this has worked flawlessly without any bsods. To start off, here are the reports. I got a 0x116 error which is usually a heating issue, but my temps for my gpu never go above 67 degrees Celsius on load. And my cpu never goes above 55 degrees Celsius.
http://www.mediafire.com/view/2acbbr0lnt9slbh/bsod.txt
I would like to mention that this had been problem before the 12.5 beta drivers came out that resolved that problem. I was wondering whether I should downgrade to that version, because I need to use the catalyst control center for forcing some application settings. Last time I downgraded, that tab didn't even exist. Unless there's another application for forcing these settings, I will gladly download. But until then, I'm looking for new solutions and if anybody else is having these issues.
I also have an dvi > hdmi adapter, if the hdmi + dvi combo is what's causing the problem. I could do hdmi + hdmi, but I have not tried that yet. I may attempt that and post results within a few days as these bsods are random and can occur several times each day.
Thanks. Please tell me if anybody else is having this problem.
Two more things to add: I've gone through a lot of driver cleaning and reinstallation. No good results. In addition, I've had this dual monitor set up for like 7 months now. I don't know why I'm getting bsods only now and not before. Because of this fact alone, I feel like my entire hypothesis on the two monitors is false, but then again, it works perfectly on one monitor for a day straight.
http://www.mediafire.com/view/71y3t7jp8m8uu8l/DxDiag.txt
In summary:
• Case: NZXT Phantom White w/ Red Trim (Full Tower)
• CPU: Intel Core i5-3570k
• CPU Cooler: Asetek 550LC
• GPU: Sapphire Radeon 7970 (Factory OC at 950/1425)
• Keyboard: Sidewinder x6
• Motherboard: Asrock Z77 Extreme 4
• Mouse: SteelSeries Sensei Raw
• OS: Windows 7 64bit Home Premium
• PSU: CORSAIR TX750
• RAM: Corsair Dominator Platinum 16GB (4 x 4GB) 1866Mhz
I'm using 14.4 catalyst software suite, and the Display Driver ver. 14.10.100614.10.1006
I'm hooked up with an hdmi from my main monitor and a dvi cable from my second monitor. Both cables are new.
So basically, I'm getting bsods randomly, sometimes during a simple action on a web browser (which only happened to me once) or sometimes one hour or 6 hours after on heavy load. There were only three crashed reported, but there were about 2/3 more that didn't have a minidump file created for them.
When trying to go into BlueScreen View today, I found that none of the red errors showed up anymore. I've temporarily fixed my problem by using one monitor and unplugging the monitor connected by dvi. So far, this has worked flawlessly without any bsods. To start off, here are the reports. I got a 0x116 error which is usually a heating issue, but my temps for my gpu never go above 67 degrees Celsius on load. And my cpu never goes above 55 degrees Celsius.
http://www.mediafire.com/view/2acbbr0lnt9slbh/bsod.txt
I would like to mention that this had been problem before the 12.5 beta drivers came out that resolved that problem. I was wondering whether I should downgrade to that version, because I need to use the catalyst control center for forcing some application settings. Last time I downgraded, that tab didn't even exist. Unless there's another application for forcing these settings, I will gladly download. But until then, I'm looking for new solutions and if anybody else is having these issues.
I also have an dvi > hdmi adapter, if the hdmi + dvi combo is what's causing the problem. I could do hdmi + hdmi, but I have not tried that yet. I may attempt that and post results within a few days as these bsods are random and can occur several times each day.
Thanks. Please tell me if anybody else is having this problem.
Two more things to add: I've gone through a lot of driver cleaning and reinstallation. No good results. In addition, I've had this dual monitor set up for like 7 months now. I don't know why I'm getting bsods only now and not before. Because of this fact alone, I feel like my entire hypothesis on the two monitors is false, but then again, it works perfectly on one monitor for a day straight.
Facebook
Twitter
Instagram