9 Pin USB Connector to Motherboard

[RylieDetchon]

I'm looking at these new Thermaltake Riing RGB Premium Fans for my chassis. The fans connect to a controller, which then connects to the motherboard via 9 pin USB header.

Does the 9 pin go straight onto the motherboard? My motherboard is the ASRock H110M-ITX/ac and has these USB connectors:

If it does go straight onto the mobo, do I sacrifice a USB header?

All answers appreciated.

-Rylie

 

[Matt_150]

If it is a nine pin than that is a USB Header and you will be using one.

There is always something like this:

https://www.moddiy.com/products/10%252dPin-USB%7B47%7DAC97%7B47%7DHD%252dAudio-Internal-Header-Y-Splitter-Cable-(5cm).html?gclid=Cj0KEQiAzNfDBRD2xKrO4pSnnOkBEiQAbzzeQbH-6TtPcCDy5GMsz275k6niW0yQXQme016ro4p486IaAv2I8P8HAQ

 

[RylieDetchon]

If it is a nine pin than that is a USB Header and you will be using one.

Thanks very much. Should I use the 3.0 header or would a 2.0 make no difference, and save the 3.0 for the ports on my front I/O?

 

[Matt_150]

USB 2.0