[SOLVED] 970 Evo 1tb showing Performing below expectations (35th percentile)

Nov 11, 2019
8
0
10
0
I have updated the firmware through magician, updated drivers to samsung, checked policy for write in file explorer, still says it's (Performing below expectations (35th percentile)! Thank you for helping.

UserBenchmarks: Game 108%, Desk 126%, Work 145%
CPU: AMD Ryzen TR 2950X - 87.2%
GPU: Nvidia RTX 2080 - 110.9%
SSD: Samsung 970 Evo NVMe PCIe M.2 1TB - 302.4%
RAM: Unknown F4-2400C15-16GTZRX F4-2400C15-8GTZRX F4-2400C15-16GTZRX F4-2400C15-8GTZR F4-2400C15-16GTZRX F4-2400C15-8GTZRX F4-2400C15-16GTZRX F4-2400C15-8GTZRX 96GB - 139.2%
MBD: Asus PRIME X399-A
 
Nov 11, 2019
8
0
10
0
Confusing and alarmist.

Your drive is one or two percentage points slower than "OMG UberSpeed!!!"
Of course..."slower" means "OMG! There is a problem!!!"

No, there is not.
That's ridiculous. The site should show a stock category and overclocked Catagory.

Thank you very much for your help. If you see anything on there that I can do to upgrade it and get my actual percentages that are lower up, it would be appreciated. I made a post in the proper section for that. https://forums.tomshardware.com/threads/looking-for-suggestions-newbie-to-overclocking.3543823/ Thanks again
 
Per those results, if you got 3490 MB/sec, but, 70% of others got 3500 MB/sec, you'd be in the bottom.

Userbenchcrap gets zero hits from me, and, likely sends many folks on useless wild goose-chases....

CrystalDiskMark sequential reads/writes will very quickly tell you if your storage device is working to specs...
 
Nov 11, 2019
8
0
10
0
Per those results, if you got 3490 MB/sec, but, 70% of others got 3500 MB/sec, you'd be in the bottom.

Userbenchcrap gets zero hits from me, and, likely sends many folks on useless wild goose-chases....

CrystalDiskMark sequential reads/writes will very quickly tell you if your storage device is working to specs...
Thank you
 

ASK THE COMMUNITY

TRENDING THREADS