970 pro nvme cant install os

[davinblackard]

I just bought a samsung 970 pro nvme drive and i went to install windows 10 home to it and the firdt time i didnt change the bios settings but the install worked got all the way through the installation and updating drivers when it went to bsod now ive changed the settings and tried reinstalling and now its stuck in a loop i go through install process it reboots to setup and starts over i stead what can i do to solve this? I suspect my drive is not formatted correctly for windows 10. What format should an nvme be formatted to? I have windows 10 on another drive so i can use disk part if someone can give me the command sequence

 

[atomicWAR]

Need a full system spec. As for format, NvME drives accept the very same formats as regular hdd/SSDs so I doubt that is your issue.

 

[davinblackard]

Full system specs.
Amd ryzen 2700x processor
Msi x470 pro carbon motherboard
4x8gb corsair rgb ram 3200mhz c14 ram
Evga supernova 650 power supply
Radeon r9 390 graphics card

 

[davinblackard]

Bios settings ive tried with both windows whql support on and off in uefi only and uefi and legacy i cant find csm function although it mentions it in descriptions bios is up to date

 

[richpixel]

How are you installing, eject install media when system is about to restart, i had this on my 860 nvme it was booting ftom windows install media, another option restart system, keep tapping f8 then choose the samsung evo to boot from

 

[davinblackard]

How are you installing, eject install media when system is about to restart, i had this on my 860 nvme it was booting ftom windows install media, another option restart system, keep tapping f8 then choose the samsung evo to boot from

Oddly enough bro i think thats what it is so far ive got it to boot but its crashed several times while updating drivers and im not gotteing full speeds. Im getting about 2300 write 2000 read

 

[richpixel]

check the mobo manual to check the correct m.2 slot is used