I had a nasty heat problems w\ my Athlon XP 1600+(2 1/2years old). The thermal pad was reused and didn't work very well. I monitored the temps: above 80C. So I got some silver grease and an extra 80mm fan.
I made some changes and got a nice airflow: the PSU and the fan beneath the PSU are getting the air out and the fan beneath the HDD is getting fresh air in. I still wasn't content w\ the temps: 56C on full load, so I also decreased the Vcore from 1.750(Default) to 1.550(min the boardcan do). It's much more stable now(300W PSU is less stressed) and temps go as high as 44C on full load.
Not long ago I discovered that the CPU can operate safely @ 1.85V, So i thought of the OCing potential. I'm now thinking of getting an ASUS A7N8XE-deluxe mobo, along w\ an OCZ Dual Channel Kit 2x256MB @ 400MHz and a Volcano 11+ cooler.
Current specs:
Athlon XP 1600+
MSI K7T Turbo 2
256 MB stupid SDRAM, stupid 3-3-3-6 timings and stupid PQI low quality
MSI GeForce2 MX-400 Pro
Caviar 27 GB HDD 7200rpm
Any of you think this upgrade is worthy??Any Comments?? I'm not bluffing about the low temps.
I made some changes and got a nice airflow: the PSU and the fan beneath the PSU are getting the air out and the fan beneath the HDD is getting fresh air in. I still wasn't content w\ the temps: 56C on full load, so I also decreased the Vcore from 1.750(Default) to 1.550(min the boardcan do). It's much more stable now(300W PSU is less stressed) and temps go as high as 44C on full load.
Not long ago I discovered that the CPU can operate safely @ 1.85V, So i thought of the OCing potential. I'm now thinking of getting an ASUS A7N8XE-deluxe mobo, along w\ an OCZ Dual Channel Kit 2x256MB @ 400MHz and a Volcano 11+ cooler.
Current specs:
Athlon XP 1600+
MSI K7T Turbo 2
256 MB stupid SDRAM, stupid 3-3-3-6 timings and stupid PQI low quality
MSI GeForce2 MX-400 Pro
Caviar 27 GB HDD 7200rpm
Any of you think this upgrade is worthy??Any Comments?? I'm not bluffing about the low temps.
