A question regarding the define r5

[Guest]

Hi,

Im buying this case soon and it only just occured to me about my limited desk depth. So does anyone who owns the case know the dimensions of the r5 case FEET.

As in, distance from back of bacl feet to front of front feet. If the feet aren't perfectley on the desk then ill have to rethink where i put it.

Thank you

 

[riccardan-humiliato]

http://www.fractal-design.com/home/product/cases/define-series/define-r5-black

Case dimensions (WxHxD): 232 x 451 x 521mm
Case dimensions - with feet/screws/protrusions: 232 x 462 x 531mm

 

[Bearmann]

15 5/8 inches.

 

[Gingerbread]

Whole case length is 53cm and the length between those 2 is around 44 cm (had measured it some time ago but I don't have it anymore and I can't really recall but I am pretty sure the distance between the front and the front leg was around 6cm and the distance between the back and the back leg was 3cm).

 

[Guest]

Judging by those measurements the feet should all be on desk, but the very front 4 cm or so will overhang the edge. This a problem at all?

 

[riccardan-humiliato]

If you're implying 4cm of the case will be over the edge, that won't be a problem at all.

 

[Bearmann]

You would rather have an approximated measurement rather than the exact measurement you asked for measured just prior to posting? Not only that, but the answer chosen was off by about 8 cm. since it was estimated between the feet and not from the outside edge of each foot (assuming each foot is about 2 cm in diameter). Converting 15 5/8 inches to cm yields 39.7 cm.