Question A320 Ryzen 3600 debug

[cerby2412]

Hi there, i recently purchased a Ryzen 5 3600 and installed into my A320M Pro m2 v2 motherboard. I have installed the correct bios update for the board. When i boot up the pc runs but i have no display and the cpu debug light is on. What could i be missing?

 

[tennis2]

What graphics card do you have installed? Make sure the monitor cable is plugged into the graphics card, not the mobo.

 

[cerby2412]

What graphics card do you have installed? Make sure the monitor cable is plugged into the graphics card, not the mobo.

Its a Gtx 1070 and it is plugged into the gpu

 

[tennis2]

Have you tried resetting the CMOS on the mobo?

 

[cerby2412]

Have you tried resetting the CMOS on the mobo?

That i have. I've even reseated the cpu, took out one ram stick and tried different ram slots

 

[tennis2]

You for sure installed BIOS version 7B84v34?

 

[cerby2412]

You for sure installed BIOS version 7B84v34?

Yes quite sure. Just double checked the readme file. Doesn't make sense to me. Are you able to swap cpus as soon as you've updated it. I was using a 1200

 

[tennis2]

Hmm. Not sure what's wrong then....

 

[cerby2412]

Hmm. Not sure what's wrong then....

Thank you for trying to help me though.. Going to take it to my local tech see if he can figure it out.