A8 7600 APU + GA-F2A88XM-DS2 - something's wrong

Eric Kinzhalin

Reputable
Aug 6, 2015
2
0
4,510
Hi all,

Just bought these along with R7 250, installed everything and it won't start. Tried the following:
1. Removed the external video, plugged the monitor into APU's HDMi and then normal slot - still wouldn't start
2. Removed the PCI-E cable from ATX_12V, and it starts, but monitor has no signal. The PC emits no beeps at all. Note that the ATX_12V, which is 4x2, accepts only 3x2 plug, but not 2x1.
3. Removed memory sticks - it beeps.
4. Reset BIOS by turning off the power, removing power cable and pressing Power button for a while.
5. Reassembled everything from the ground-up. Still no signal.
What can it possibly be? Appreciate any help.
 
2. Removed the PCI-E cable from ATX_12V, and it starts, but monitor has no signal. The PC emits no beeps at all. Note that the ATX_12V, which is 4x2, accepts only 3x2 plug, but not 2x1.

what?


There is an 8 pin power connector for the processor . The psu will have an 8 pin power connector .

There is also a 24 pin power connector on the mb which also needs connecting

Read the manual
 


I of course plugged it.