abit ab9-quadgt

Toggle sidebar Toggle sidebar
too bad about the memory timings unable to reach ddr2-800 at a stable rate🙁 Hopefully there will be a flash soon. I'm going to give this mb a try anways.

on newegg's site down at the bottom they state:

Notice: Only DDR2-800 memory supporting JEDEC approved 1.8V operation with timings of 5-5-5 or 6-6-6 is supported on Intel Desktop Boards based on Intel 965 Express Chipsets.

http://www.newegg.com/product/product.asp?item=N82E16813127019

Which leads to some more questions, I'd like to by some 4-4-4-12 or 4-4-3-5 modules. Not sure what will happen...
 
too bad about the memory timings unable to reach ddr2-800 at a stable rate🙁
Click to expand...
where are you getting that from - it will do way past that ... :?

The statement about Jedec spec. is true of all 965 boards but it doesn't mean that's all that it will run just that's all that's officially supported.
266fsb is all that's officially supported too but the mobo will do over 500 ...
 
too bad about the memory timings unable to reach ddr2-800 at a stable rate🙁
Click to expand...
where are you getting that from - it will do way past that ... :?

The statement about Jedec spec. is true of all 965 boards but it doesn't mean that's all that it will run just that's all that's officially supported.
266fsb is all that's officially supported too but the mobo will do over 500 ...

The bios as of now, the memory won't go past ddr2-667. I am getting the information off of the customer reports. Also, newegg says the board is only designed w/ ddr2-800 in mind. I can't find any specifications saying anything over ddr2-800.
 
The bios as of now, the memory won't go past ddr2-667. I am getting the information off of the customer reports. Also, newegg says the board is only designed w/ ddr2-800 in mind. I can't find any specifications saying anything over ddr2-800.
Click to expand...
I've got 1, it will & also Anandtech say it will. http://anandtech.com/mb/showdoc.aspx?i=2911&p=4
"The board was able to handle settings of 5-4-4-12 up to DDR2-1010. Our final settings of 5-5-4-15 at DDR2-1030 required a voltage increase to 2.325V."
& that was on the release BIOS not the later 1.

It gets to ~1050 or so which means that if you run 1:1 the board is running ~525fsb (that's using the 1067 strap mind).
Remember that no mobo manufacturer will officially support anything that the component manufacturers won't & afaik that's all that Intel claim for the chipset.
 
I've got 1, it will & also Anandtech say it will. http://anandtech.com/mb/showdoc.aspx?i=2911&p=4
"The board was able to handle settings of 5-4-4-12 up to DDR2-1010. Our final settings of 5-5-4-15 at DDR2-1030 required a voltage increase to 2.325V."
& that was on the release BIOS not the later 1.

It gets to ~1050 or so which means that if you run 1:1 the board is running ~525fsb
Click to expand...

well then, okay for this board!! :)

what cpu are you using? and how high you think it runs e6600 with supertalent ddr2 800 c4?

tell us more with your overclocking experience with this board, please.. :twisted:
 
Dear Sir,

Thanks for your mail.
1. The Intel and JMicron conflict problem will be solved by next BIOS.

2. The AB9-QuadGT need new revision to support 1333Mhz FSB CPU.



**
Please include all previous messages for continuation of support and do not delete
the series number on subject for identification.

Best Regards,
ABIT Customer Service Center
WWW: http://www.abit.com.tw
FAE: http://fae.abit.com.tw
E-Mail: technical@abit.com.tw
Click to expand...

bad news for all future cpu :evil:
 
would be interesting to know why as we all now know that the board can run 2200fsb+
I wonder if Intel's fooling around with the VRM specs again?

Any way buy it & run it now as Bearlake will be out when the 1333 CPUs are.
 
nice blue led motherboard eh? :twisted: :twisted: :twisted: :twisted: :twisted:

latest beta bios B06 can be downloaded here:
http://images.anandtech.com/reviews/motherboards/abit/ab9-quadgt/M621E_11A.rar

latest uguru software 3.101 can be downloaded here:
ftp://ftp-usa.abit.com.tw/pub/download/utilities/uguru

cachememni4.jpg

superpiks1.jpg

hdtachkk7.jpg

3dmark06commandovsab9quyu9.jpg

myrigac9.jpg
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom