ABIT AI7 (Springdale) - NB/AGP Core Voltage?

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

Softmenu Setup
- AGP VDDQ Voltage: 1.55

Voltage Monitoring
- NB/AGP Core Voltage: 1.57

Why does it say under the monitoring tab NB/AGP? Is that meaning
Northbridge?

I noticed allot of people who overclock their P4's set the AGP to 1.6v or
1.65v which I never could understand, but if it is giving extra volts to the
northbridge then I understand.

What does VDDQ mean?

Many thanks
--
Wayne ][
<Intel® Pentium® 4 - Online! 😛>

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

Wayne Youngman wrote:
> Softmenu Setup
> - AGP VDDQ Voltage: 1.55
>
> Voltage Monitoring
> - NB/AGP Core Voltage: 1.57
>
> Why does it say under the monitoring tab NB/AGP? Is that meaning
> Northbridge?
>
> I noticed allot of people who overclock their P4's set the AGP to
> 1.6v or
> 1.65v which I never could understand, but if it is giving extra volts
> to the northbridge then I understand.
>
> What does VDDQ mean?
>
> Many thanks

Vddq is the I/O supply voltage for an AGP card and used for the data
transmission, or "signaling" circuitry on the card. The min and max
Vddq voltage is 1.425V and 1.575V respectivley.

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

"ICee" wrote
> Vddq is the I/O supply voltage for an AGP card and used for the data
> transmission, or "signaling" circuitry on the card. The min and max
> Vddq voltage is 1.425V and 1.575V respectivley.


Why does it say under the monitoring tab NB/AGP? Is NB meaning Northbridge?
--
Wayne ][
<Intel® Pentium® 4 - Online! 😛>

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

Wayne Youngman wrote:
> "ICee" wrote
>> Vddq is the I/O supply voltage for an AGP card and used for the data
>> transmission, or "signaling" circuitry on the card. The min and max
>> Vddq voltage is 1.425V and 1.575V respectivley.
>
>
> Why does it say under the monitoring tab NB/AGP? Is NB meaning
> Northbridge?

I don't know; I don't have that MB. Looking at the manual, there is a
BIOS setting in the Softmenu Setup listed as "N/B Strap CPU As" which
has to do with the Memory Controller Hub. There is no listing for NB
voltage, just for AGP Vddq voltage, and no mention of what N/B is.
North Bridge sounds logical, though.

 

[TomG]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

NB does mean Northbridge.

--

Thomas Geery
Network+ certified

ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP
This IP is dynamic so it *could* change!...
over 130,000 FTP users served!
^^^^^^^




"Wayne Youngman" <waynes.spamtrap@tiscali.co.uk> wrote in message
news:4088f4b8$1_2@mk-nntp-2.news.uk.tiscali.com...
>
> "ICee" wrote
> > Vddq is the I/O supply voltage for an AGP card and used for the data
> > transmission, or "signaling" circuitry on the card. The min and max
> > Vddq voltage is 1.425V and 1.575V respectivley.
>
>
> Why does it say under the monitoring tab NB/AGP? Is NB meaning
Northbridge?
> --
> Wayne ][
> <Intel® Pentium® 4 - Online! 😛>
>
>

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

"TomG" wrote
> NB does mean Northbridge.

Hi,
thanks Tom. So if that is the case it would appear that the AGP voltage is
also effecting the NorthBridge?. I always found on nForce2 boards that you
needed to *increase* the voltage to the Northbridge when you were
overclocking. If bumping up the AGP Voltage has a *knock-on* effect to the
Northbridge then I can see why the overclockers are running 1.65v to their
AGP.

I will test it out soon, but I'm not sure why the NB description only
appears on the voltage-monitoring page and not softmenu?
--
Wayne ][
<Intel® Pentium® 4 - Online! 😛>

 

[TomG]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

I cannot speak to whether the NB and AGP voltages are linked. I have not
heard of anyone else in the group going this direction to enhance
OC-ability.

--

Thomas Geery
Network+ certified

ftp://geerynet.d2g.com
ftp://68.98.180.8 Abit Mirror <----- Cable modem IP
This IP is dynamic so it *could* change!...
over 130,000 FTP users served!
^^^^^^^




"Wayne Youngman" <waynes.spamtrap@tiscali.co.uk> wrote in message
news:408a3abd$1_1@mk-nntp-2.news.uk.tiscali.com...
>
> "TomG" wrote
> > NB does mean Northbridge.
>
> Hi,
> thanks Tom. So if that is the case it would appear that the AGP voltage
is
> also effecting the NorthBridge?. I always found on nForce2 boards that
you
> needed to *increase* the voltage to the Northbridge when you were
> overclocking. If bumping up the AGP Voltage has a *knock-on* effect to
the
> Northbridge then I can see why the overclockers are running 1.65v to their
> AGP.
>
> I will test it out soon, but I'm not sure why the NB description only
> appears on the voltage-monitoring page and not softmenu?
> --
> Wayne ][
> <Intel® Pentium® 4 - Online! 😛>
>
>

 

[Guest]

Archived from groups: alt.comp.hardware.overclocking,alt.comp.periphs.mainboard.abit (More info?)

nb = nota bene = note well; or, maybe, in this case, northbridge B^)

--
Phil Weldon, pweldonatmindjumpdotcom
For communication,
replace "at" with the 'at sign'
replace "mindjump" with "mindspring."
replace "dot" with "."

"Wayne Youngman" <waynes.spamtrap@tiscali.co.uk> wrote in message
news:4088f4b8$1_2@mk-nntp-2.news.uk.tiscali.com...
>
> "ICee" wrote
> > Vddq is the I/O supply voltage for an AGP card and used for the data
> > transmission, or "signaling" circuitry on the card. The min and max
> > Vddq voltage is 1.425V and 1.575V respectivley.
>
>
> Why does it say under the monitoring tab NB/AGP? Is NB meaning
Northbridge?
> --
> Wayne ][
> <Intel® Pentium® 4 - Online! 😛>
>
>