ABOUT GTX 1050Ti

[eziosimon1995]

I have got a frontech jil 2414i 450watts psu with an i5-3470 processor and Gigabyte H61M-S1 motherboard with bios version F2.
Will i be able to use Gtx 1050ti oc edition from zotac.
currently i am using Asus Gt 1030 basic heatsink one and its running fine.
Please tell me as i am thinking of changing my gpu to zotac gtx 1050ti oc edition

 

[vinnykellberg]

The 1050ti only uses 75 watts. Your PSU is more than enough. I’m running it on a 250w 😀

Buy the 1050ti you won’t regret it!

 

[eziosimon1995]

The 1050ti only uses 75 watts. Your PSU is more than enough. I’m running it on a 250w 😀

Buy the 1050ti you won’t regret it!

 

[eziosimon1995]

that means my motherboard won't cause issues with this card and i will be fine running gtx 1050ti.
Can u also suggest me cabinet under 2000Rs or 30us dollars that can accommodate gtx 1050ti as my old cabinet Frontech Xeon is not able to fit it and the hdmi port on card is getting out of area where it should be

 

[zebarjadi.raouf]

that means my motherboard won't cause issues with this card and i will be fine running gtx 1050ti.

The motherboard won't cause a problem. I'm more worried about your PSU. It's very bad quality and it says 12Vx19A=228W instead of 450W. I would change it when possible.

Can u also suggest me cabinet under 2000Rs or 30us dollars that can accommodate gtx 1050ti as my old cabinet Frontech Xeon is not able to fit it and the hdmi port on card is getting out of area where it should be

Pick any you like as long as it's recently manufactured. Almost all the ones built recently follow the newer standards/fittings. You might wanna decide after getting the 1050Ti.

 

[eziosimon1995]

I tried installing Gtx 1050 and i am getting no signal in my monitor
all the fans and hdd lights even the gtx 1050's fans are running but my monitor is still saying no signal whereas as soon as i change my gpu to old one Gt 1030 it starts normally as it should

 

[dontlistentome]

Does that bios have a 'secure boot' option? It might be the bios is not allowing changes be made to this computer. If so, you can try disabling secure boot, then install the card, then reenable secure boot afterwards.

 

[eziosimon1995]

ok i will check and see about secure boot settings

 

[eziosimon1995]

Also i checked about my psu on internet and somewhere i found it was written 450w psu and power output was 240 w.
So Can my Psu cause problems or i need to change it