Accidentally changed Video in BIOS from IGD (HD 3000) to Ext PCIe Slot

bharathbigb

Distinguished
Jan 7, 2013
354
0
18,860
Guys,I need your Help.I had an old Geforce 210 so I wanted to test it before selling it.

1) My Motherboard is Intel dh67cl
2) My current GPU was Intel HD 3000 with the i5 2500K
3) Inside BIOS,I accidentally changed from IGD to Ext PCIe Slot
4) With Hope Connected my Geforce 210 and connected the Monitor Cable
5) Restarted and It beeps like Beep....Beep....Beep....Beep and after that Nothing
6) Fans,HDDs everything was running perfect
7) Numlock was on but I couldn't turn it off so I assumed it is Unusable

So now my screen is blank but PC seems to run when on Beeping and it Hangs

Guys,Please help me.

Is there anyway to reset the BIOS in the Motherboard ?
 
Solution
So take out the video card, and reboot and see if it boots back to the IGD.

If not, remove the CMOS battery from your motherboard as well the power from the wall. Let it sit a few minutes for the caps to discharge so the BIOS can reset itself. Then put the battery back in, plug the power back in, and it should default to IGD again.
So take out the video card, and reboot and see if it boots back to the IGD.

If not, remove the CMOS battery from your motherboard as well the power from the wall. Let it sit a few minutes for the caps to discharge so the BIOS can reset itself. Then put the battery back in, plug the power back in, and it should default to IGD again.
 
Solution
Oh thanks for the fast reply.I took out the Video Card to itry if it still boots and no it doesn't.Same thing happens.I am also having A tough time removing the Battery.So I should remove the Battery,Power and let it sit for a Few Minutes right ? Can you teach me how to remove the Battery y?
 
Oh I forgot to tell,I didn't see a PCIE X16 Slot option in my BIOS but I have one in my Motherboard.So only I selected PCIe Ext Slot and that was a big mistake.I removed the Battery safely and now I am letting her sit tight.
 


So I tried it 3 times but I didn't Work out.I will tell how I did so you can help me

1) Removed All The Connections Outside including the Power
2) Removed the CMOS Battery
3) Didn't touch anything inside except the Battery
4) Kept her Idle for 15 Minutes
5) First,I put back in the CMOS Battery
6) Connected all the Connections Outside and last being the Power
7) Powered On with the Monitor Cable for the HD 3000 and Still the same error Came
8) I powered off and then put in the Geforce 210
9) When I powered on the Beep sound was gone but still no Video on Display came and Numlock light got Stuck
10) So I pressed Reset Button and the Beeps return.

Am I doing it correct ? I am gonna try it again